How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Master Technician
Category: Chrysler
Satisfied Customers: 18692
Experience:  ASE Master Tech 15+ Years
Type Your Chrysler Question Here...
George H. is online now
A new question is answered every 9 seconds

I have a quick question how do i route the belt between the

Customer Question

Customer: i have a quick question how do i route the belt between the power steering pump and the crank on a 2011 chys 200 with the 2.4l motor
JA: Thanks. Can you give me any more details about your issue?
Customer: Just replaced an alternator last night an in the process the belt became completely undone. I have the belt routing diagram for the car but cant seem to get the belt correctly through the motor mount where is was originally ran.
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $16) to post your type of question to Chrysler Experts (you only pay if satisfied). There are a couple customers ahead of you. Are you willing to wait a bit?
Customer: of course thanks in advance
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Customer: thank you
Submitted: 1 year ago.
Category: Chrysler
Expert:  George H. replied 1 year ago.

Hello I will help you with your question,

Do you have a new belt with some nylon wire ties?

Customer: replied 1 year ago.
No, I dont
Customer: replied 1 year ago.
Is there any other way to route the belt by the motor mount?
Expert:  George H. replied 1 year ago.

Look over the procedure from the manual and see if that matches what you are seeing

Click here

Do you have the same pulley setup?

Customer: replied 1 year ago.
we do
Expert:  George H. replied 1 year ago.

Good, follow that procedure to install the belt, it does fit through the mount area if routed as shown.

Let me know how I can help

Thank you

Customer: replied 1 year ago.
Will do, thank you
Expert:  George H. replied 1 year ago.

Great, please let me know if you have further questions

Thank you

Expert:  George H. replied 1 year ago.

How did you do with the belt?