Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
Hay, again with ‘09 Chrysler 300 3.5 engine. Will the car
Hi Hay, Jeff again with ‘09 Chrysler 300 3.5 engine. Will the car not start with egr not installed into the upper intake? My other concern is back to the timing belt that we just replaced.I'll send pi… read more
Jaybird61
Jaybird61
Master Automotive Mechanic
3,983 satisfied customers
2010 Has P0300 Code and it runs rough. I changed all the
2010 Has P0300 Code and it runs rough. I changed all the plugs and coil packs and still an issue. It seems to be advance the timing live up to 13 degrees and sputters. It shows RPM movement at 780 app… read more
Daniel Lehrman
Daniel Lehrman
237 satisfied customers
I have a 2013 Ram 1500 5.7l Hemi that cranks over but will
I have a 2013 Ram 1500 5.7l Hemi that cranks over but will not start. I have a lightning bolt warning and service throttle body alarm and have changed that and camshaft sensor but truck still will not… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
Replaced camshaft sensor and crankposition sensor still
Replaced camshaft sensor and crankposition sensor still reads it needs sensors … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
23,937 satisfied customers
2005 caravan 3.8 will not rev over 2500 rpm. has codes
2005 caravan 3.8 will not rev over 2500 rpm. has codes p0344,intermittent cam signal, p0016 cam crank sync state. has both cam and crank new. my snap on scanner data says -91.6 degrees out , but only … read more
Gunvir Singh
Gunvir Singh
1,949 satisfied customers
Yellow light on console of 2006 300 Chrysler V8 Hemi, losing
yellow light on console of 2006 300 Chrysler V8 Hemi, losing about 2 miles per gallon from before the light came on, already got a new altenator per mechanici… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,279 satisfied customers
99 chrysler town and country lxi cranks but no start getting
99 chrysler town and country lxi cranks but no start getting fuel at rail and changed cam and crank sensor 3.8 l… read more
Amedee
Amedee
Chrysler Technician
Vocational, Technical or Trade Scho
1,418 satisfied customers
2008 chrysler PT cruiser car stated running ruff Drove about
2008 chrysler PT cruiser car stated running ruff Drove about 3 mil. car sat for 4 hr ran ok check engien light on check code p0340 camshft position sensor A bank 1 circuit malfunction . Dose that mean… read more
Dodgerench
Dodgerench
Driveability Tech
Vocational, Technical or Trade Scho
3,456 satisfied customers
2006 pacifica revs up sometime to 7 and jumps when I put it
2006 pacifica revs up sometime to 7 and jumps when I put it in drive. when running the ac is revs up even moore… read more
Eric
Eric
49,774 satisfied customers
Chrysler Pacifica: 2004 Crysler Pacifica 3.5 L how many teeths
2004 Crysler Pacifica 3.5 L how many teeths are from right camshaft to the left camshaft, because I replace the timing belt and crankshaft and right camshaft aligned perfect but the right camshaft is … read more
Mrchippeway
Mrchippeway
chrysler mechanic
Vocational, Technical or Trade School
135 satisfied customers
Chrysler: i have a 97 breeze motor was replaced with used one,
i have a 97 breeze motor was replaced with used one, started and ran a couple times last time died while running in the drive. injectors have no ground, have changed all sensors and ASD relay, during … read more
Clayso
Clayso
Shop Owner Master Technician
ASE Master Certified Automobile Technician
879 satisfied customers
Chrysler serbring: my 98 serbing jxi just stop when making
my 98 serbing jxi just stop when making a turn at low speed. No spark, turns over. I am told that the distributor and cam shaft sensor needs to be replaced. 52000 miles never any problems. does this s… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
99 Chrysler Sebring: any spark at the spark plugs..quarts
I have a 99 Chrysler Sebring JXi 2.5 motor. I am not getting any spark at the spark plugs. Where everything started, my girlfriend put three quarts of oil too much in the engine. While driving, the en… read more
Chris
Chris
18,867 satisfied customers
1999 seabring convertible 2.5 jxi 1391 code changed
1999 seabring convertible 2.5 jxi 1391 code changed distributor,crank sensor, timing belt -check continuit & ohms reading between parts & computer what we get is cam & crank not in sync also replaced … read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
9,283 satisfied customers
Chrysler Grand Voyager: Automatic..04 plate..only 23,000 miles on it
I have a Chrysler Grand Voyager 3.3 Automatic. It is an 04 plate but has only 23,000 miles on it so it shouldn't be subject to wear and tear too much. The probem is that when I accelerate most of the … read more
Stonyman
Stonyman
automotive technician
High School or GED
723 satisfied customers
2001 chrysler sebring: cyl..the accelerator..rpms..intermittent
When I start my 4 cyl 2001 chrysler sebring, I can low rpm low gear out of my driveway fine. When I step on the accelerator to get going on the main roads the rpms shoot up and then chug back down and… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
Chrysler crossfire: a OCM and is it fixable or just replaceable
I hear the chrysler crossfire has some problems with the OCM component. What exactly is a OCM and is it fixable or just replaceable???… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
13,997 satisfied customers
Car wont..smell..sparkplugs are running rich and the other is lean
After starting and running car wont restart. Let it sit and it starts again after 30 minutes.Had a funny sulfur smell and one side of sparkplugs are running rich and the other is lean. Any clues?… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

627 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

920 satisfied customers

24 years of experience diagnosing & repairing

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

212 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

1,418 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

garrtim

garrtim

service manager

1,129 satisfied customers

20+ years chrysler certified

Jerry

Jerry

Master Mechanic

697 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x