How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric, Automotive Repair Shop Manager
Category: Chrysler
Satisfied Customers: 31934
Experience:  20+ years experience as automotive store manager and technician.
Type Your Chrysler Question Here...
Eric is online now
A new question is answered every 9 seconds

Abs light is on constantly, charging system voltage

Customer Question

abs light is on constantly, charging system voltage condition - battery voltage low. the electrical system voltage level is moitored for intended voltage level. probable cause, loose or missing drive belt , alt. defective , battery defective ( brand new battry ) poor electical connection. battery loss within 50 start ups . (explanation ) battery disconnected with inthe last 50 starts.(probable cause ) diagnostic trouble codes have been cleared within the last 50 key cycles. poor electrical connection. how do i find solution ?
Submitted: 1 year ago.
Category: Chrysler
Expert:  Eric replied 1 year ago.
I am sorry that you have not been helped yet. I just came online and saw your question.
Ok, this could be a faulty alternator, short in the field generator wire going between the pcm and the alternator, or faulty pcm.
If you have a voltmeter and fair to good understanding of 12v DC wiring and connector pinouts, I can give you testing directions to diagnose this