How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad
Brad, Dealership Technician
Category: Chrysler
Satisfied Customers: 7832
Experience:  19 Yrs Chrysler/Dodge Technician..ASE Master Certified(L-1)
10114124
Type Your Chrysler Question Here...
Brad is online now
A new question is answered every 9 seconds

I ve replaced my 2007 chrysler300 throttle control but light

Customer Question

I ve replaced my 2007 chrysler300 throttle control but light continues to come on. BUT ONLY WHEN OUTSIDE TEMP. IS COOL SAY 50 DEG. ???
Submitted: 1 year ago.
Category: Chrysler
Expert:  Brad replied 1 year ago.

Did you relearn the ETC with a scantool after you replaced it?

Customer: replied 1 year ago.
not sure. A dealer did it for me.
Expert:  Brad replied 1 year ago.

You will need to retrieve the codes from the PCM and run the diagnostic test for each code to determine the problem.. Anytime you replace the ETC it will need to be relearned with a WiTech scantool so the PCM reads it correctly, if not you will get no throttle acceleration or poor engine performance..