How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22655
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I have a 1996 Seabring convertable 2.3 that starts to

Customer Question

I have a 1996 Seabring convertable 2.3 that starts to misfire only after it gets up to running temp.I have put on a new catalytic converter,crank sensor,air temp sensor,map sensor,distrebutor,cap plugs & wires.I am out of ideas.What could be my problem?
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!

If it's an actual misfire you're feeling, considering everything you've ruled out the most likely causes would be injector related or possibly cylinder sealing issues. You could have a valve or spring issue, which really shouldn't be temperature related, or you may have an injector going down due to an internal failure, wiring issue or failing driver within the powertrain control module.

The first step in diagnosing the problem is checking for fault codes. Do you know what codes are setting?