How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, Mechanic
Category: Chrysler
Satisfied Customers: 16027
Experience:  Have owned a repair shop for 25 yrs.
14541291
Type Your Chrysler Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

Chrysler 300M: My 2000 300M want start. I changed the cam crank

Customer Question

My 2000 300M want start. I changed the cam crank sensor and computer. Getting a code p0320 and p1684
Submitted: 2 years ago.
Category: Chrysler
Expert:  Tim's Auto Repair replied 2 years ago.
Hi, My name is ***** ***** for the delay.I will do my best to assist youtell me,,how and when did it stop running..
Customer: replied 2 years ago.
It was running. I cut it off and it wouldn't start back. It was about a month
Expert:  Tim's Auto Repair replied 2 years ago.
so,,it cut off while driving?does the starter turn the engine really easy?
Expert:  Tim's Auto Repair replied 2 years ago.
how many miles is on the car?
Customer: replied 2 years ago.
I switched it off. 167233 miles
Customer: replied 2 years ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Tim's Auto Repair replied 2 years ago.
and,,you replaced the crank sensor and the cam sensor..right?
Customer: replied 2 years ago.
Yes
Expert:  Tim's Auto Repair replied 2 years ago.
ok..the 1684 code doesnt mean anything,this only means the computer has been cleared recently
Expert:  Tim's Auto Repair replied 2 years ago.
i can give you my thoughts here
Customer: replied 2 years ago.
Ok
Expert:  Tim's Auto Repair replied 2 years ago.
i think the engine may have jumped time on the timing belt
Expert:  Tim's Auto Repair replied 2 years ago.
this is why it wont start and you get the cam sensor code
Expert:  Tim's Auto Repair replied 2 years ago.
stand by,,i will give you tets/checks for the 340 code
Expert:  Tim's Auto Repair replied 2 years ago.
though,i think it may be the timing belt
Expert:  Tim's Auto Repair replied 2 years ago.
PLEASE COPY AND PASTE the link below to your browser, I have uploaded more info on this there please copy and paste the link below to your main browser[INTERNET EXPLORER or FIREFOX].https://www.dropbox.com/s/9zsvhd8fufqzdz6/0729-300m-timing-REMOVAL.doc?dl=0.if the link doesn’t work that way, try it this waythanks.www.dropbox.com/s/9zsvhd8fufqzdz6/0729-300m-timing-REMOVAL.doc?dl=0. If you are satisfied with my answer, Please Rate my answer by clicking the rating button so I can get credit for my work. I’m not always going to be giving you good news, so please don't let this stand in the way of you accepting my answer. .it does not cost you more money and we will still be able to communicate, ,.please understand, i can not see, hear or touch the vehicle and only know what you tell me. Bonuses and positive feedback are appreciated.. if you are not satisfied with my answer, please do not leave bad feed back ,i will gladly opt out and let another expert handle the question. .if i have sent any diagrams, please print them. .sometimes you may need to right click the image [,then save picture as]to save it to your computer so you can open it with your picture program...Please ask if you need more help
Customer: replied 2 years ago.
It's not out of time
Expert:  Tim's Auto Repair replied 2 years ago.
ok,the belt is in time?
Customer: replied 2 years ago.
I found a short in the wires going to the crank sensor. It cranked and cut off. It did this about five times, no it want do anything.
Customer: replied 2 years ago.
Now it want do anything
Expert:  Tim's Auto Repair replied 2 years ago.
ok,,do you have a spark now?will it fire with a prime?
Customer: replied 2 years ago.
It want turn over now
Expert:  Tim's Auto Repair replied 2 years ago.
the sstarter wont turn?
Customer: replied 2 years ago.
No
Expert:  Tim's Auto Repair replied 2 years ago.
that has nothing to do with the cam or crank sensor
Expert:  Tim's Auto Repair replied 2 years ago.
is the battery fully charged?
Customer: replied 2 years ago.
Yes
Expert:  Tim's Auto Repair replied 2 years ago.
on the remote,,,unloc the doors..it may be the security
Customer: replied 2 years ago.
The remote doesn't work
Expert:  Tim's Auto Repair replied 2 years ago.
why is the remote not working?
Customer: replied 2 years ago.
It's busted up
Expert:  Tim's Auto Repair replied 2 years ago.
use the key and unlock the truck and or the drivers door
Customer: replied 2 years ago.
Still nothing
Expert:  Tim's Auto Repair replied 2 years ago.
ok..please stand by..i will opt out,,maybe one of the other guys may know what is going on..someone will be right with you
Customer: replied 2 years ago.
Ok thanks