How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 518
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Chrysler 300 m: replaced timing belt, lined up marks with TDC,

Customer Question

replaced timing belt, lined up marks with TDC, engine won't turn over and backfires.
Submitted: 2 years ago.
Category: Chrysler
Expert:  Jerry replied 2 years ago.
Hello and welcome. My name is ***** ***** you for visiting the site, I will be happy to assist you today..Did the old belt break?.What is the compession?.
Customer: replied 2 years ago.
yes belt broke. seem to have good compression. mech says its backfiring cuz timing is off, but I tried many times including spinning cams 180.
Expert:  Jerry replied 2 years ago.
I am not sure what 'seems to' have good compression actually is. Do you have the readings?