How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22989
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Chrysler: 1999 sebring 2.5 motor blow stater fuse replace

Customer Question

1999 sebring 2.5 motor blow stater fuse replace stater fix that now want start
Submitted: 2 years ago.
Category: Chrysler
Expert:  sprinkles08 replied 2 years ago.
Hello and welcome to JustAnswer!
There are quite a few things that can cause a no start, especially depending on what it's actually doing. If it wont' crank you could have an issue with the replacement starter or a connection issue, if it cranks but doesn't start then you may be missing fuel pressure or spark. The distributor and crank sensor are the most common causes of lost spark on these.
The powertrain control module may also be down due to an internal failure or loss of power or ground.
What happens when you try to start the engine?