Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Chrysler Questions
I have just replaced a broken cam belt on 2.0 pt cruiser
I have just replaced a broken cam belt on 2.0 pt cruiser lined up crank mark also cam wheel marks but wont start.rechecked cam timing even swapped pulleys but marks are still in the same place. … read more
Roy
Roy
shop foreman
Associate Degree
4,481 satisfied customers
It want start want fire put new crank sensor new cam sensor
it want start want fire put new crank sensor new cam sensor still no fire … read more
jc_davil
jc_davil
57 satisfied customers
I have a 2002 pt cruiser non turbo it turns over but wont
I have a 2002 pt cruiser non turbo it turns over but wont start my timing belt is not broke I changed the crankshaft position sensor and the camshaft positioning sensor still no luck my fuel pump is w… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,065 satisfied customers
PT cruiser drives fine on short trips turn it off try to
PT cruiser drives fine on short trips turn it off try to start will not start after it sits a few hours it will start and run fine lately it has been stopping as you're driving down the road again if … read more
Chris
Chris
15,116 satisfied customers
Chrysler PT Cruiser Street Cruiser: My PT Cruiser 2009 appears
My PT Cruiser 2009 appears to be having an electric problem. I changed the coil box new cables and spark plugs. It seems like it is going to start but doesn't my mechanic says it's the computer chip t… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,065 satisfied customers
My 2003 pt cruser will not start we changed cam sensor
my 2003 pt cruser will not start we changed cam sensor timing appears good coil was changed has fuel but will not start… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,323 satisfied customers
Chrysler PT Cruiser: 2005 pt 2.4 liter cranks but no start.
2005 pt 2.4 liter cranks but no start. No spark. Changed coil and cam sensor and checked all fuses?… read more
Chris
Chris
15,116 satisfied customers
Chrysler PT Cruiser Touring: 2006 pt cruiser ran had to change
2006 pt cruiser ran had to change head now no spark changed cam sensor changed crank sensor changed coil changed cam magnet all fuses good diagnostic says no cam or crank signal and tps reading .3 hee… read more
Amedee
Amedee
Chrysler Technician
Vocational, Technical or Trade Scho
956 satisfied customers
Chrysler PT Cruiser Touring: I have a 04 PT Cruiser with 2.4L
I have a 04 PT Cruiser with 2.4L non turbo it is giving a 0340 code. I have replaced the cam position sensor and the car still will not start. Just a little history on the car it has a new battery, co… read more
MoparHeat
MoparHeat
Automotive Technician
ASE Automotive Technician
988 satisfied customers
2007 pt cruiser: had blown head gastket..ran before replaceing it.
2007 pt cruiser had blown head gastket. ran before replaceing it. then no spark! have preplaced crank, cam sensor and coil pack. got power to the coil. Have got fuel coming out of injectors . need to … read more
Vladimir Grodskiy
Vladimir Grodskiy
Automotive Electrician
Vocational, Technical or Trade Scho
2,724 satisfied customers
P300: replaced spark plugs..plugs wires..coil pack..cam sensor..PO 344
2003 Pt shows po300 code replaced spark plugs wires & coil pack and code set again any ideas change cam sensor when PO 344 came up but still sets PO300 code. Need to smog test & it's getting frustrati… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2003 PT Cruiser: light keeps coming..new spark plugs..spark plug wires
I have a 2003 PT Cruiser with 87,000+ miles. The engine light keeps coming on and the car will not turnover when this happens. We have had it in the shop several times at which time they have changed … read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2005 pt cruiser turbo: convertable..cam sen,the coil..crank sensor
have a 2005 pt crusier turbo 2.4 convertable that i cant get to fire have changed the cam sen,the coil .and the crank sensor and the car is still not getting spark please help… read more
garrtim
garrtim
SERVICE MANAGER
2,266 satisfied customers
2001 pt cruiser: cam sensor, crank sensor, coil pack and spark plugs
i have a 2001 pt cruiser going down the hwy acted like an altinator started loosing lights radio etc... tried jumping the car then it would turn over but not start. got spark but its inconsistant spar… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,320 satisfied customers
2002 Chrysler PT Cruiser: over but wont start..fuel pump..pulling
I have a 2002 Chrysler PT Cruiser that turns over but wont start. Checked the fuel pump seemed okay, checked the fuel rail pressure and had 50psi. Checked for spark by pulling and grounding a spark pl… read more
rich
rich
Associate Degree
366 satisfied customers
2001 pt cruiser: firing..1 and 4, i changed the cam sensor but with it
my 2001 pt cruiser is only firing on 1 and 4, i changed the cam sensor but with it unpluged it fires well. what else could it be?… read more
Vladimir Grodskiy
Vladimir Grodskiy
Automotive Electrician
Vocational, Technical or Trade Scho
2,724 satisfied customers
Pt cruiser: wont start..the coil pack and got spark..crankshaft sensor
I have a pt cruiser that wont start. I changed the coil pack and got spark. I changed the crankshaft sensor per advice from just ask and that did not solve the problem. the car turns over but will not… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2003 PT CRUISER: FUEL RAIL..COIL PACK, SPARK PLUGS..SPARK PLUG WIRES
2003 PT CRUISER, I HAVE FUEL, APPROX 58PSI ON THE FUEL RAIL WHILE TRYING TO CRANK. BUT GOT NO SPARK. THE COIL PACK, SPARK PLUGS, AND SPARK PLUG WIRES WERE REPLACED ABOUT 6 MONTHS AGO AT DEALERSHIP. CA… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
11,548 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

545 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

568 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

956 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

39,260 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x