How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 23115
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Chrysler Pacifica: On a 2004 chrysler pacifica, what is the

Customer Question

On a 2004 chrysler pacifica, what is the ohms reading for the secondary pump on the right side? The right side is empty and reading 220 ohms.
Submitted: 2 years ago.
Category: Chrysler
Expert:  sprinkles08 replied 2 years ago.
Hello and welcome to JustAnswer!
There isn't a published specification for fuel sender resistance. The best way to check it's operation is by monitoring it's signal on a scan tool as it is moved. If it was replaced and especially with a Mopar part I wouldn't expect an issue with the sender.
The gauge dropping is most likely going to be a fuel transfer issue but could also be software related or the sender physically getting stuck. If fuel isn't transferring due to a pinched, kinked, or disconnected line then it will cause this.
One of the most common causes of this was a sender getting hung up on something in the tank, usually misrouted lines or wiring between the two pumps.