How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 522
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Chrysler Sebring JXi (Convertible): 97 Chrysler Sebring convertible

Customer Question

97 Chrysler Sebring convertible 2.5 blowing codes p0300,01,02,04,05,06 distibutor, cranksensor, plugs, wires, egr,intake gaskets,fuel filter have all been recently changed. Will stall periodically when started. Then fine once engine is warm. Will buck seldom at highway speeds. Though never has a pattern though does not do it when shifting. .. any thoughts. Vehicle has 167000 miles parts were changed 3000 miles ago
Submitted: 2 years ago.
Category: Chrysler
Expert:  Mike S. replied 2 years ago.

What do you mean by "blowing codes"? Do you mean showing codes?

Why were all of these parts replaced? Were they replaced because of these codes or did the codes show up after replacing any of these parts?

My first though is some fuel injectors are sticking.

Expert:  Mike S. replied 2 years ago.
Do you still want help with this?