Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
Heavy negative camber on both rear wheels. Fair to good.
Yes... No attempt yet... Trying to figure out why it had negative rear camber after having new tires put on at and an alignment done … read more
Kyle
Kyle
Under hood Technician
1,660 satisfied customers
I drive a 2011 Chrysler 200. Just had annual state
I drive a 2011 Chrysler 200. Just had annual state inspection in September and got vehicle alignment done at the time time (had been pulling to the right). All tires passed inspection, but did need to… read more
sara cole
sara cole
associates
108 satisfied customers
I have a 1999 chrysler sebring convertible with 45000 miles
I have a 1999 chrysler sebring convertible with 45000 miles on it. At approximately 45 mph there is a wobble. I have been told that this is a common issue, but have to believe there is a solution … read more
Cesar Jimenez
Cesar Jimenez
Owner/CEO
Vocational, Technical or Trade School
239 satisfied customers
Chrysler Town & Country Touring: Firestone claims they
Firestone claims they rebuilt on my 2007 Chrysler Town and Country all the front end suspension shocks etc... I took it in to have them reolace the rear shocks very creaky. Got the van back and it wob… read more
Andrew
Andrew
Level A Technician
Technical Certificate
2,325 satisfied customers
Chrysler 2005 300-c Have steering wheel lateral wobble (side
Chrysler 2005 300-c Have steering wheel lateral wobble (side to side) after having 2 tie rods, new rotors, and brake pads. It does not happen all the time but when it starts, it won't stop. Firestone … read more
Stacy Farist
Stacy Farist
Owner
High
37 satisfied customers
Chrysler 300: I just had the passenger side lower control arm
I just had the passenger side lower control arm ball joints an strut arm replaced an a wheel alignment done on a 2005 Chrysler 300,now when I go down the express way my car pulls to the left lane hard… read more
Eric
Eric
Retired
N/A
46,006 satisfied customers
Chrysler Pacifica LX: I really need help here. My 2005 Chrysler
I really need help here. My 2005 Chrysler Pacifica is pulling to the left at speeds over 55mph. I've had a wheel alignment, change the struts, replaced all 3 motor mounts (just replaced one of them ag… read more
Clayso
Clayso
Shop Owner Master Technician
ASE Master Certified Automobile Technician
879 satisfied customers
cHRYLSER PT CRUISER: I have a Chrysler pt cruiser and the steering
I have a Chrysler pt cruiser and the steering wheel shakes at city speeds I just had the tire filled? B… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
697 satisfied customers
Chrysler 300M: 1999 chrysler 300m...has two issues and dont
1999 chrysler 300m...has two issues and dont know if they are related. 1st issue is the stering has about 2 or 3 inch play. 2nd issue is wheel wobble Noticable at about 60mph but not all the time seem… read more
mcleodagency
mcleodagency
Associate Degree
276 satisfied customers
300C: steering wheel..at braking..Brake and rotor are new..front end
My Chrysler 300C 2008 steering wheel wobble at braking. Problem is worse when I'm going straight and a lot less when I'm in curve. Brake and rotor are new and have all the front end checked for any da… read more
garrtim
garrtim
service manager
1,129 satisfied customers
My 2001 T&C the steering wheel logo is..20 degrees
On my 2001 T&C the steering wheel logo is no longer horizontal, but tilts to the left about 20 degrees, when the wheels are straight. Steering seems OK. Does this pose any problem? What would a mechan… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,228 satisfied customers
2011 Chrysler: awd..steering wheel..speeds over 60mph..tires
I have a 2011 Chrysler 300c awd. I have a shimmy or shake in the steering wheel from right to left at speeds over 60mph. I have had the tires and wheels rebalanced and rotated still there… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,714 satisfied customers
2002 PT Cruiser: rotor, hub and bearings..Tires..steering wheel
2002 PT Cruiser, 113K miles, hit a curb,(right front passenger side) and have had the wheel replaced, rotor, hub and bearings. Tires have been checked for out of round, and all fall within industry to… read more
supertech
supertech
Vocational, Technical or Trade Scho
2,235 satisfied customers
2000 Chrysler Town & Country LXi: front 2 wheel drive..steering wheel
What to check and do next? Vehicle: • 2000 Chrysler Town & Country LXi, 3.8L engine, frontXXXXXonly and 4wheel ABS. Problem: • Severe vibration shakes vehicle and can be felt through steering wheel. V… read more
robert legowski
robert legowski
2,067 satisfied customers
2006 pacifica: AWD..touring..000 miles..the rear end became unstable
I have a 2006 pacifica AWD touring with 46,000 miles. I had new front tires and the rear tires balanced at a dealer last week. We were 800 miles into anXXXXXtrip when the rear end became unstable. I s… read more
Josh
Josh
Lead Technician
High School or GED
1,570 satisfied customers
2007 Pacifica: steering wheel..steering pump..Chrysler..mechanics
My recently purchased 2007 Pacifica makes a distinct "groaning" noise when turning steering wheel to right only , whether in motion or at rest. Changed steering pump fluid and tie rod ends to no avail… read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,764 satisfied customers
2005 300c: 000 miles..Front end..The alignment starts pulling
I have a 2005 300c with 44,000 miles. Front end wobbles between 35 & 40 mph. The alignment starts pulling to the right after about 5,000 miles after having it aligned. I had the dealer balance the tie… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,898 satisfied customers
Chrysler 300 c: the rack and pinion, steering column..sits
we have a Chrysler 300 c 2006, replaced the rack and pinion, steering column now sits about 90 degrees to the left, not one mechanis we've talked to can explain a fix or why!! Thanks… read more
Eric
Eric
Retired
N/A
46,006 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

618 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

862 satisfied customers

24 years of experience diagnosing & repairing

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

174 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

1,285 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

garrtim

garrtim

service manager

1,129 satisfied customers

20+ years chrysler certified

Jerry

Jerry

Master Mechanic

697 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x