Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
Chrysler 2010 Town & country: I have a 2010 Town & country
I have a 2010 Town & country with less than 50,000 mi & the transmission has gone out for the 3rd time. Two dealers replaced the compounder gear & bearings with less than 2,000 mi between fixes. I thi… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,671 satisfied customers
Chrysler PT Cruiser: -I have 2002 pt with 116k mi. About
Hi-I have 2002 pt with 116k mi. About 3 days ago I noticed a slight tap-like sound in motor. My husband sprayed a blast of PB blaster into pcv valve @ intake & valve cover where I add oil. Seems a lit… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
17,895 satisfied customers
Chrysler Concorde Limited: 2004 concord trans in limp mode
2004 concord trans in limp mode replaced tcm code po700 keeps coming up. when i put trans in reverse driver side mirror goes to down position put in drive mirror returns. no power to 10 amp pcm fuse w… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,919 satisfied customers
Chrysler 300: I had my 2012 Chrysler 300 in to the shop a month
I had my 2012 Chrysler 300 in to the shop a month ago to check out the bluetooth module. They did a reset and mentioned it could get an upgrade but they did not have the cable. They have still been wa… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
36,774 satisfied customers
Chrysler PT Cruiser Touring: My 2005 PT Cruiser has been exhibiting
My 2005 PT Cruiser has been exhibiting transmission problems. not changing from 3rd to 4th gear. I have been told that the computer chip needs replacement. Any idea whet this means and what a replacem… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,919 satisfied customers
I have a 2003 PT cruiuser I bought used with 135000 miles.
I have a 2003 PT cruiuser I bought used with 135000 miles. It made a noise when turning to the right . I told the shop where I bought it that I felt the POwer steering was going out but they refused t… read more
Steve
Steve
Service Manager/ Technician
5,473 satisfied customers
I own a Chrysler Concorde 2002 and I have a problem with the
I own a Chrysler Concorde 2002 and I have a problem with the voices appeared in the engine coincided with the emergence of the oil lamp I thought at first glance it's oil pump and you changed it with … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,919 satisfied customers
Chrysler PT Cruiser My engine light came on in my 2001 PT
My engine light came on in my 2001 PT Cruiser which has 89,000 miles on it. It was diagnosed with an error code P0605 by my transmission guy after my regular mechanic told me the light was indicated d… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,919 satisfied customers
93 Lebaron GTC: steering wheel..tires..drivers side half shaft seats
My girl friend's '93 Lebaron GTC has intermittant steering wheel shimmy that I would normally attribute to cupped or bulged tires. After excluding this possibility I looked further and found excessive… read more
Max Kenney
Max Kenney
Vocational, Technical or Trade Scho
127 satisfied customers
300M: pcm..it jumps..goes to 40mph and check engine light goes on?
I am using my $25.00 credit to get a valid answer to the 2004 Chry - 300M question which was not really answered the last time. It was just taken to a dealer who said that the PCM wire connector locks… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,919 satisfied customers
2005 Town & Country: transmission flushed..metal..rebuild..automatic.)
We had the transmission flushed on our 2005 Town & Country. They said they found pieces of metal and we need to rebuild the transmission.(It's automatic.) Should we try to rebuild it or do you think w… read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,772 satisfied customers
Chrysler Sebring GTC: convertible..inspection and a drive
I actually purchased a Chrysler Sebring GTC convertible 03 with 73000 miles to a car dealer. After inspection and a drive around the neighboorhood, I felt the car was in really good condition and deci… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
Voyager: It started with a code 1776 and jumping out of gear
I am trying to fix a 1997 plymouth Voyager 3.3L. It started with a code 1776 and jumping out of gear. I changed the fluid & filter. It ran fine and shifted perfectly for 40 miles. Started acting up ag… read more
Max Kenney
Max Kenney
Vocational, Technical or Trade Scho
127 satisfied customers
96 town & country: wipers..turn signals..somewhere..wiring diagram
I have a 96 town & country , wipers did not work when I bought it. Now I am intermitently losing all dash instruments and turn signals I have been told this is a body control module problem. Could thi… read more
Eric
Eric
Retired
N/A
47,023 satisfied customers
Chrysler: fitted a new Control Module (Expensive)..tested..smooth
The Chrysler Dealer fitted a new Control Module (Expensive) and after they road tested it they said it now has "hard" gear changing. I gather this means its not smooth. They dont know why until they i… read more
David Dill
David Dill
Master Level Chrysler Technician
High School or GED
834 satisfied customers
2000 dodge durango: my head is cracked and my valves are burnt
I have a 2000 dodge durango and have been told my head is cracked and my valves are burnt. I am currently deployed so I can not validate this at all. I was wondering if the crack is not too bad is it … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,919 satisfied customers
2001 jeep grand cherokee: is because the new transmission
i recently had an 04 transmission put in my 2001 jeep grand cherokee, a month later my orriginal engine failed catestrophicaly. my friend says this is because the new transmission and the older engine… read more
David Dill
David Dill
Master Level Chrysler Technician
High School or GED
834 satisfied customers
96 concorde: the check engine light came on..diagnostic code
My 96 concorde died yesterday and then the check engine light came on. I took it to a mechanic and he said that he was coming up with a diagnostic code P1698 and he didn't know what it meant. I looked… read more
Eric
Eric
Retired
N/A
47,023 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

618 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

862 satisfied customers

24 years of experience diagnosing & repairing

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

174 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

1,285 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

garrtim

garrtim

service manager

1,129 satisfied customers

20+ years chrysler certified

Jerry

Jerry

Master Mechanic

697 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x