How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chrysler Tech -
Category: Chrysler
Satisfied Customers: 19038
Experience:  18+yrs experience. State Inspector & Chrysler Diagnostics
18617752
Type Your Chrysler Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

chrysler pt cruiser: head bolt torque specs on 2004 pt cruiser

Customer Question

head bolt torque specs on 2004 pt cruiser 2.4 litre double overhead cam
Submitted: 5 years ago.
Category: Chrysler
Expert:  Ron Z. replied 5 years ago.

Welcome to JustAnswer.com! My name is DriveFast71(Ron) and I will do my best to answer all of your questions completely and accurately.


 

Tighten the cylinder head bolts in the sequence shown. Using the 4 step torque turn method, tighten according to the following values:

  • - Step 1: All to 34 Nm (25 ft. lbs.)
  • - Step 2: All to 82 Nm (60 ft. lbs.)
  • - Step 3: All to 82 Nm (60 ft. lbs.)
  • - Step 4: Turn an additional 1/4 Turn. Do not use a torque wrench for this step.
Expert:  Ron Z. replied 5 years ago.

Tighten the cylinder head bolts in the sequence shown. Using the 4 step torque turn method, tighten according to the following values:

  • - Step 1: All to 34 Nm (25 ft. lbs.)
  • - Step 2: All to 82 Nm (60 ft. lbs.)
  • - Step 3: All to 82 Nm (60 ft. lbs.)
  • - Step 4: Turn an additional 1/4 Turn. Do not use a torque wrench for this step.