How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Chrysler
Satisfied Customers: 23950
Experience:  Independent Shop Experience, 2 Year Automotive Diploma, & Access to Information Database
17871496
Type Your Chrysler Question Here...
Dan is online now
A new question is answered every 9 seconds

Chrysler pacifica how do i reset the service engine light

Customer Question

how do i reset the service engine light after an oil change on my 07 pacifica touring?
Submitted: 6 years ago via OnlineAutoRepair.
Category: Chrysler
Expert:  Dan replied 6 years ago.

Welcome to JustAnswer, my name is Dan and I'm here to help get your problem resolved. Ask follow up questions, thanks.

 

You can press the "step" button to reset the oil life indicator, but this is not the same as the service engine soon light which means the computer detected a problem with vehicle....You can bring vehicle to parts store to have them connect a scantool to check and reset diagnostic codes causing service engine light to come on.

Customer: replied 6 years ago.
where do i find the "step" botton?
Expert:  Dan replied 6 years ago.

On the information center control, but this will only take care of the oil change indicator.....If your service engine light is on its not related.

 

 

Electronic Vehicle Information Center Display - EVIC

Service Interval

When this feature is selected a service interval between 3,200 km (2,000 miles) and 10,000 km (6,000 miles) in 800 km (500 mile) increments may be selected. Pressing the STEP button when in this display will select distances between 3,200 km (2,000 miles) and 10,000 km (6,000 miles) in 800 km (500 miles) increments.

Reset Service Distance (Displays Only if Service Interval was Changed)

When this feature is selected the current accumulated service distance can be reset to the newly selected service interval. Pressing the STEP button when in this display will select Yes or No .