How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Instructor jp Your Own Question
Instructor jp
Instructor jp, Technical Instructor Master ASE
Category: Chrysler
Satisfied Customers: 315
Experience:  Manufacturer Chrysler Instructor
Type Your Chrysler Question Here...
Instructor jp is online now
A new question is answered every 9 seconds

Chrysler Sebring How do I replace a rear license plate light

Customer Question

How do I replace a rear license plate light on a Chrysler Sebring?
Submitted: 6 years ago.
Category: Chrysler
Expert:  Instructor jp replied 6 years ago.

Hello thank you for using just answers.


Let me see if I can help.


Here is the list for removal of the housing and bulb.

Let me know if you need more.

Two versions for your body style



  1. Using a flat bladed tool, gently pry the lamp from the license plate opening.
  2. Disconnect the wire harness connector.
  3. Remove bulb.


  1. Remove screws attaching license plate lamp to rear bumper fascia.
  2. Remove license plate lamp .
  3. Rotate socket counterclockwise one quarter turn.
  4. Pull socket from back of lamp.
  5. Pull bulb from socket.

Edited by Instructor jp on 2/19/2011 at 1:22 PM EST