How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
Type Your Chrysler Question Here...
brownjeff is online now
A new question is answered every 9 seconds

how do i remove rotor on 2008 chrysler town and country

Customer Question

how do i remove rotor on 2008 chrysler town and country?
Submitted: 7 years ago.
Category: Chrysler
Expert:  brownjeff replied 7 years ago.
Are you working on the front or rear?
Customer: replied 7 years ago.
working on front.
Expert:  brownjeff replied 7 years ago.

You need to remove the bolts (#3) in the picture to remove the brake caliper bracket. They turn counterclockwise to remove. Then after the bracket is off the rotor will come off. It may be stuck and need to hit it with a hammer need the center to free it up.



brownjeff and 3 other Chrysler Specialists are ready to help you
Customer: replied 7 years ago.
Thank you - there is also a bolt on the face of the rotor - does this need to come off? If so, does it also turn counterclockwise?
Expert:  brownjeff replied 7 years ago.
If your talking about the one in the it does not need to be removed.