How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask garrtim Your Own Question
garrtim, service manager
Category: Chrysler
Satisfied Customers: 6277
Experience:  20+ years chrysler certified
Type Your Chrysler Question Here...
garrtim is online now
A new question is answered every 9 seconds

2001 chrysler 300m: just replaced the shift solenoid..i troubleshoot?

Customer Question

just replaced the shift solenoid on a 2001 chrysler 300m and i am getting a p1739 code. how do i troubleshoot?
Submitted: 8 years ago.
Category: Chrysler
Expert:  garrtim replied 8 years ago.
Shifter display on dash not working correctly P1739 Power up at speed P1792 Battery was disconnected Found wiring plug under battery not plugged in properly plug almost unplugged
garrtim and 3 other Chrysler Specialists are ready to help you
Customer: replied 8 years ago.

i am not sure i understand this answer....can you walk me through it?

Expert:  garrtim replied 8 years ago.

pull battery out and inspect the wiring harness that runs under the battery ,tim

let me know what you find

Customer: replied 8 years ago.
hi....i removed the battery and checked all connections that i can find.....i really do not see anything under the battery......but alll seems connected that i see.....any ideas? thanks
Customer: replied 8 years ago.

hi...i pulled out the battery....checked all electrical harness....they all seem to be connected....i did not really see one that runs directly under the battery......any ideas?