How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mopar Certified Your Own Question
Mopar Certified
Mopar Certified, Technician
Category: Chrysler
Satisfied Customers: 11332
Experience:  24 Year Factory Trained and Certified
12104952
Type Your Chrysler Question Here...
Mopar Certified is online now
A new question is answered every 9 seconds

2001 pt cruiser: cooling fan..wont run..relays are good..fuses

Resolved Question:

2001 pt cruiser cooling fan wont run. relays are good. fuses are good. when activated with scan tool there is power to the fan and relay clicks but fan still does not run. if you use a power probe to give the fan voltage it will run. i dont get it?
Submitted: 8 years ago.
Category: Chrysler
Expert:  Mopar Certified replied 8 years ago.
<p>Here is your quote...</p><p> </p><p>"when activated with scan tool there is power to the fan and relay clicks but fan still does not run.</p><p> </p><p>If you have power and ground to the fan it should run..........otherwise the fan is faulty.</p><p> </p><p> </p>
Customer: replied 8 years ago.
my only question now is why if the fan is faulty can i make it run with the power probe?
Expert:  Mopar Certified replied 8 years ago.
<p>I refuse to use the power probes because they provide too many miss "diagnosis".</p><p> </p><p>When you actuate the fan with the scan tool........you have power to the fan.......correct?.........do you also have a ground?</p><p> </p><p>Power and ground will make the fan run....as you know, just put the power probe away. </p>
Mopar Certified and 2 other Chrysler Specialists are ready to help you