How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22679
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Chrysler Concorde: the camshaft position sensor located

This answer was rated:

Where is the camshaft position sensor located on a Chrysler Concorde 2002? Does the engine have to be pulled?
Hello and welcome to JustAnswer!

Which engine do you have in your car?
Customer: replied 8 years ago.
v6 3.5lt
Ok. The cam sensor is located on the left bank cylinder head. It runs off a tone wheel on the cam sprocket. It is a 3 wire sensor held in with a 10mm bolt. The engine doesn't have to be pulled, you just have to loosen and raise the upper intake manifold to access it. Here is a picture of it.
sprinkles08 and 2 other Chrysler Specialists are ready to help you

Related Chrysler Questions