Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
I have a 1985 c-10 with an early 90's carbeurated 350 crate
I have a 1985 c-10 with an early 90's carbeurated 350 crate engine. i have a vacuum leak after putting everything back together after a radiator flush and refill. i do not live in an area smog check i… read more
K. Wiggins
K. Wiggins
ASE Certified Technician
Associate Degree
4,290 satisfied customers
I need to reconnect a vacuum line. 1996 suburban 5.7. It
I need to reconnect a vacuum line. 1996 suburban 5.7. It starts at the thing where the pcv valve hose ends. It runs across the engine to the passenger side. Dont know where to plug it in. … read more
Expert
Expert
10,510 satisfied customers
After got car back with LS6 installed, had to have retuned
Brian, after got car back with LS6 installed, had to have retuned as smelled gas in exhaust. Was told running to rich so shop had put in colder plugs. Thought perhaps injectors flowed to much but now … read more
BRIAN
BRIAN
ASE Master Certified Technician
BS
458 satisfied customers
Back with more. Think going to remove injectors figure after
Back with more. Think going to remove injectors figure after 10 years at least seals leaking causing trim issue. Was going to also replace fuel pulse dampener, but seems don't know how yet. Supposed t… read more
BRIAN
BRIAN
ASE Master Certified Technician
BS
458 satisfied customers
Or two. Finally got plugs out and putting new in. Some
Hey day or two. Finally got plugs out and putting new in. Some difficulty deciding which as contradictory info on gap. Putting AC 41962 back that were in for now. Got info that gap preset and to avoid… read more
BRIAN
BRIAN
ASE Master Certified Technician
BS
458 satisfied customers
Here is pic of LS1 with LS6 valley plate that has an oil
Here is pic of LS1 with LS6 valley plate that has an oil separator so can skip catch-can. Note pcv branches out in back with (I believe my plugged line) going to tube on rear right. Question is still … read more
BRIAN
BRIAN
ASE Master Certified Technician
BS
458 satisfied customers
Notice difference LS1-6. They put LS1 accessories on the LS6
Notice difference LS1-6. They put LS1 accessories on the LS6 block. What is shown coming off oil intake filler is coming off right side exhaust where as LS6 has that part coming off left (driver) side… read more
BRIAN
BRIAN
ASE Master Certified Technician
BS
458 satisfied customers
Looking over LS6 on C5 forum, noticed that they spoke of
Looking over LS6 on C5 forum, noticed that they spoke of nipple coming off (?) block area by throttle body. Mine was capped as forum said should be. What is this and should it be capped? Of interest b… read more
BRIAN
BRIAN
ASE Master Certified Technician
BS
458 satisfied customers
I see why so many issues have been and will be coming up.
I see why so many issues have been and will be coming up. While they replaced LS1 with LS6, many things are rigged, incorrect, and some carelessness. First, have intake off original LS1 with its' thro… read more
BRIAN
BRIAN
ASE Master Certified Technician
BS
458 satisfied customers
Chevrolet k2500: I have a 1994 Chev k2500, 350, 75,000 miles.
I have a 1994 Chev k2500, 350, 75,000 miles. The truck has been running poorly, no power, sluggish, it didnt seem to be down shifting correctly all the time. I was looking at the vacuum lines, and dis… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
38,535 satisfied customers
Chevrolet Corvtte: 2001 Chevy Corvette Oil pressure sender
2001 Chevy Corvette Oil pressure sender is bad and I am losing small amounts of coolant suspect intake gasket need directions for replacing intake gasket and oil pressure switch.… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
94 Chevy: 6.5 turbo diesel..On the driver side..lines going..cooler
I have A 94 Chevy 2500 with a 6.5 turbo diesel. On the driver side there are 2 oil lines going to the cooler. Next to those there is a 3/8 -1/2" Diameter steel tube. After engine runs for about 2 minu… read more
Hal
Hal
owner/service tech
Vocational, Technical or Trade Scho
925 satisfied customers
2002 Impala: 3.8L..pcv..check engine light came..I replaced egr
I have 2002 Impala 3.8L Had the oil changed and PCV changed late Oct. at an oil change place. Not long after the check engine light came on EGR problem. I replaced EGR and the chck engine light came o… read more
Joel
Joel
GM Journeyman technician
Associate Degree
1,603 satisfied customers
LS: 6 Big block, What would the #s be and where would they be located
How can I tell if I have a true 1970s LS 6 Big block, What would the #s be and where would they be located? Thanks, Brent… read more
Mike S.
Mike S.
Chevy Mechanic
Vocational, Technical or Trade Scho
2,390 satisfied customers
2004 Chevy Tahoe: sitting..puffs smoke and looks to be loosing coolant
I have a 2004 Chevy Tahoe 5.3 when its started after sitting it puffs smoke and looks to be loosing coolant. it is using oil. I changed out the intake maniflod gaskets and still no luck. I noticed oil… read more
John
John
MASTER AUTOMOTIVE TECHNICIAN
2 YEARS COLLEGE
9,106 satisfied customers
MANIFOLD ON A 2003 lm4 ENGINE, IS THIS A DIRECT BOLT ON AND WHAT
I AM CONSIDERING INSTALLING A LSI LS6 MANIFOLD ON A 2003 LM4 ENGINE, IS THIS A DIRECT BOLT ON AND WHAT IF ANY MODIFICATIONS WILL BE NECESSARY?… read more
Jared
Jared
Associate Degree
92 satisfied customers
camaro: I ordered a new oem passenger side valve cover..throttle body
I have a 02 camaro 5.7 LS1 I ordered a new OEM passenger side valve cover. The one on the car now has 2 tubes coming from the cover. One with a tube with a hose that connects to the throttle body and … read more
goodwrench9124
goodwrench9124
ASE Certified Technician
Vocational, Technical or Trade Scho
2,045 satisfied customers
Camaro: the camaro is a common LS engine user it would be
I want to put an engine in my camaro to make it a monster. I figure since the camaro is a common LS engine user it would be easy to put one in the car.… read more
Davo
Davo
Master Auto Tech/manager of auto shop
Vocational, Technical or Trade Scho
1,644 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Gary

Gary

Chevy Technician

9,659 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

9,646 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

Technician

3,526 satisfied customers

24 years of experience diagnosing & repairing

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

Mike S.

Mike S.

Chevy Mechanic

2,390 satisfied customers

ASE Certified Master Technician

goodwrench9124

goodwrench9124

ASE Certified Technician

2,045 satisfied customers

Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x