Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
I have a 2002 Chevy Blazer, recently replaced brake pads,
Hello, I have a 2002 Chevy Blazer, recently replaced brake pads, calipers, rotors, master cylinder, lines, and power brake booster. Had to remove abs module to get the booster out. Went to bleed my br… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
Chevrolet Chevy truck 1500 4x4: Vehicle type: 1989 k1500 350
Vehicle type: 1989 k1500 350 four wheel drive Issue: we have replaced and bench bleed new master cylinder and installed. We installed a new ABS hydronic unit aka, dump valve or accumulator. We have re… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
GM Trailblazer: Own a 2006 Chevy Trailblazer LS 4x4 4.2L LS,
Own a 2006 Chevy Trailblazer LS 4x4 4.2L LS, having braking issues. Last July, lost pressure in the brake pedal so I switched out the master cylinder with an AutoZone Master Cyl (which I regretted lat… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
Chevrolet Silverado 1500: 2000 Silverado 1500 2wd brake pedal
2000 Silverado 1500 2wd brake pedal occasionally fully depresses to floor board when braking. Purchased vehicle last month with (50,000 miles), fluid appeared very dirty, possibly original. Pumped mas… read more
GM Tech (Cam)
GM Tech (Cam)
Chevy Technician
Vocational, Technical or Trade Scho
16,004 satisfied customers
Replaced rear rotors and pads today..bled..rear brake..pedal goes
Replaced rear rotors and pads today then bled the brakes. Now there is no rear brake pressure and the pedal goes all the way to the floor. What would cause this?… read more
Joel
Joel
GM Journeyman technician
Associate Degree
1,603 satisfied customers
1998 Chevy Blazer: think its a brake pad or rotor issue.
My 1998 Chevy Blazer's brakes go almost all the way to the floor to make the vehicle stop, how do I fix it? i don't think it's a brake pad or rotor issue. any advise? Thanks!… read more
BigBob
BigBob
Service Manager
High School or GED
4,792 satisfied customers
while bleeding brakes on my 2003 avalanche. master cylinder
while bleeding brakes on my 2003 avalanche. master cylinder was empty and pedal went all the way down now i cant bleed brakes pedal wont get firm. pedal continues to bottom out. did i screw up the mas… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
13,497 satisfied customers
1990 GMC K1500, bleed all air from brake lines with the engine
1990 GMC K1500, bleed all air from brake lines with the engine (350) off, pedal high and hard. Start the engine and pedal drops just inches from the floor and holds. Rear self adjusters cleaned and ad… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,035 satisfied customers
Pedal goes..leaks..air in the lines so I tried to bleed the brakes
My brakes went out. The pedal goes all the way to the floor. I have no leaks anywhere.I thought that there might be air in the lines so I tried to bleed the brakes. All was ok but one and no fluid wou… read more
BigBob
BigBob
Service Manager
High School or GED
4,792 satisfied customers
put all new brake calipers pads and rotors..replace the master cyl
I have put all new brake calipers pads and rotors on and couldnt get any brakes. The ddealer told me to replace the master cyl so I did and still dont have any brakes WHAT COULD BE WRONG !… read more
daves71
daves71
Service Manager
High School or GED
668 satisfied customers
Chevy express 1500: 2wd..bleed brakes pedal gets..calipers
what type of brake sys do chevy express 1500 2wd 6v have 2005 . bleed brakes pedal gets hard when truck off turn truck on pedal to floor bleed all calipers liquid from calipers no air… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
2000 Chevy blazer: brake pads..a brake line blew..master cylinder
2000 Chevy blazer replaced back brake pads when hit brakes a brake line blew. Put on new line and now no fluid will leave the master cylinder.… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
1978 chevy: brake line, now spongy peddle and light stays..pin..bleed
1978 chevey half ton truck, replaced back brake line, now spongy peddle and light stays on . Tried bleeding, clamped in pin on combination valve, bleed back first, low pressure fluid just seeps out of… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
my brakes but i just cant seem to get the brakes to compress
well i bleed my brakes but i just cant seem to get the brakes to compress likje they should… read more
SHAREREPAIR
SHAREREPAIR
Head tech.
High School or GED
74 satisfied customers
Hello, Im working on a 97 Blazer that demonstrated symtoms
Hello, I'm working on a 97 Blazer that demonstrated symtoms of a master cylinder failure. Brake pedal is soft and goes down to the floor when the engine is running. When the engine is off, the pedal s… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,693 satisfied customers
Blazer: pads..a bump and brake pedal..master cylinder..4x4
brake pedal goes to floor replaced pads shoes wheel cylinders master clynder bled brakes they worked real good for 2 weeks i went over a bump and brake pedal started going down to floor again i bled b… read more
GM Tech (Cam)
GM Tech (Cam)
Chevy Technician
Vocational, Technical or Trade Scho
16,004 satisfied customers
2000 chevy s10: changing the clutch master cylinder
I am changing the clutch master cylinder on a 2000 chevy s10 4 cylinder. I know I have to bleed the clutch, where is this done and how do I repurge the fluid into the clutch.… read more
goodwrench9124
goodwrench9124
Lead Tech/ Shop Leader
Vocational, Technical or Trade Scho
3,392 satisfied customers
2001 chevy silverado 3500: ton..pickup..the brake pedal..vibrates
I own a 2001 chevy silverado 3500 1 ton pickup , When I push the brake pedal down it almost goes to the floor then whats sounds like a electric pump sound starts and the pedel vibrates. Is this a prob… read more
RIP
RIP
Lead Technician
Vocational, Technical or Trade School
469 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

16,004 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,659 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,977 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

3,023 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x