Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
1999 Suburban 5.7 one bank plugs covered in soot. Replaced
1999 Suburban 5.7 one bank plugs covered in soot. Replaced plugs, distributor cap, rotor, both cats, upstream and downstream oxygen sensors on passenger bank. Replaced upper intake plenum and gaskets,… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
20,671 satisfied customers
GMC suburban: i have a 96 suburban with a 454it started running
i have a 96 suburban with a 454 it started running very badly the codes came up p 0175 and p 0172 system too rich i checked the vacuum lines, cleaned the MAF sensor, checked for exhaust leaks pre o2 s… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
39,238 satisfied customers
Chevrolet Suburban C1500 4x2: On a 1999 Suburban, fuel pressure
On a 1999 Suburban, fuel pressure is steady at 70 psi at all rpms, it doesnt lose any pressure after truck is off.Truck is missing and sputtering terribly. Have replaced plugs, wires, cap, rotor, ICM,… read more
Eric
Eric
Retired
N/A
36,681 satisfied customers
Chevy Suburban: I am getting too rich errors on bank one and
I am getting too rich errors on bank one and bank two. It is running rough so I am going to put new plugs and wires on it. Could that fix the codes? Thanks Derek… read more
Dave Nova
Dave Nova
Chevrolet Technician
Associate Degree
7,092 satisfied customers
1999 Chevy: first started..rough check engine light on fuel trim
1gcgk24r2xr702551 1999 Chevy 2500 Pickup when first started runs rick and rough check engine light on fuel trim -17… read more
Dave Nova
Dave Nova
Chevrolet Technician
Associate Degree
7,092 satisfied customers
Chevrolet Suburban 2500 1996 chevy suburban 2500 5.7 4x4 fuel
1996 chevy suburban 2500 5.7 4x4 fuel system 1 closed loop fuel system 2 closed loop calc load 3.1 ect (c) 90% stft b1 .7-1.5 ltft b1 5.4 stft b2 5.4 ltft b2 25.0 map kPa 33 rpm 690 speed 0 spark adva… read more
Hal
Hal
owner/service tech
Vocational, Technical or Trade Scho
925 satisfied customers
1999 GMC Sierra 1500: 4x4 (half-ton..v8..oil/lube..high idle; lots
1999 GMC Sierra 1500 4x4 (half-ton) 5.3L V8 Vortec gas. 150,000 miles Service completed in the past few months: oil/lube filter new fuel filter thermostat replaced spark plugs knock sensors replaced a… read more
Hal
Hal
owner/service tech
Vocational, Technical or Trade Scho
925 satisfied customers
1500 suburban: code misfire n system to rich..tune cap rotor wires
i have a 96 k 1500 suburban and it has a code misfire n system to rich already did a tune cap rotor wires plugs what eles ca i do to fix this… read more
Dave Nova
Dave Nova
Chevrolet Technician
Associate Degree
7,092 satisfied customers
1999 gmc: 7.4l (454ci) hard starting, mileage..rich..fuel pump
1999 gmc k2500 with 7.4l (454ci) hard starting, mileage of 13mpg to 10-11mpg and codes p0172 & p0175 (left and right bank rich) new fuel pump 3/12 months ago, one time of not starting but started next… read more
David H
David H
Vocational, Technical or Trade Scho
2,678 satisfied customers
1992 chevy astro: running rough..tune..fuel pump..the distributor
i have a 1992 chevy astro van that is running rough. i dont have alot of money and cant afford to keep replacing parts thru process of elimination. I have recently done a tune-up, replaced the fuel pu… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
2003 Impala: V6..guage..idle speed but acts fine at speed
2003 Impala V6 3.8....temp guage fluctuates up and down at idle speed but acts fine at speed. Had the radiator flushed (mississippi mud in radiator). I'm having to add about a half gallon of coolant e… read more
GM Tech (Cam)
GM Tech (Cam)
Chevy Technician
Vocational, Technical or Trade Scho
16,004 satisfied customers
HOW DIFFICULT WOULD IT BE TO CHANGE THE INTAKE MANIFOLD GASKET
HOW DIFFICULT WOULD IT BE TO CHANGE THE INTAKE MANIFOLD GASKET ON MY 1999 3 QUARTER TON 4X4 CHEVY SUBURBAN WITH A 454 VORTEC ENGINE? WHERE COULD A FIND THIS PROCEDURE?… read more
Eric
Eric
Retired
N/A
36,681 satisfied customers
1992 lumina: replacing the intake gasket should I put sealant..coolant
1992 lumina car 3.1 replacing the intake gasket should I put sealant around the coolant ports and the push rods are differant lenghts where do they go… read more
BigBob
BigBob
Service Manager
High School or GED
4,792 satisfied customers
95 Blazer: obd..changed the plugs, electronic egr valve, oxygen sensor
I have a 95 Blazer with the OBD-1 computer and 4.3L engine. My problem is that it seems to be stuck in a overly rich condition. I have changed the plugs, electronic EGR valve, oxygen sensor and it sti… read more
Dave Nova
Dave Nova
Chevrolet Technician
Associate Degree
7,092 satisfied customers
2000 gmc: wires, cap, rotor, upper plenum gasket..injectors..000 miles
2000 gmc k2500 454 is having starting problems. New fuel pump (60psi),fuel filter, plugs, wires, cap, rotor, upper plenum gasket, throttle postion sensor, coolent sensor, fuel regulator, no sign of in… read more
GM Tech (Cam)
GM Tech (Cam)
Chevy Technician
Vocational, Technical or Trade Scho
16,004 satisfied customers
1999 Chevy Suburban: auto O/D 2wd..O2 sensors..lean..rich
1999 Chevy Suburban 5.7L auto O/D 2wd. O2 sensors on bank 2 showed very lean upstream (34-96mv) and very rich downstream (900+mv). Engine at idle would end up fouling plugs on bank 2 (2,4,6,8) and bla… read more
car-pro
car-pro
Associate Degree
54 satisfied customers
1999 chevy suburban: #5 cylinder miss..about 1200 rpms..rpm..scanner
We have a 1999 chev suburban 5.7L, #5 cylinder miss at idle only, until about 1200 rpms, after higher rpm's miss disappears -- as per snap -on scanner info. replaced wires, plugs and injector. Engine … read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,108 satisfied customers
I just did a cylinderhead gasket job on my 1999 chevy suburban 5.
i just did a cylinderhead gasket job on my 1999 chevy suburban 5.7 engine put every thing back together now when i try to start truck gas is fouling my spark plugs gas is coming from all spark plug ho… read more
j_ramsey
j_ramsey
High School or GED
480 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

16,004 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,659 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,977 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

3,023 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x