Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
I hae, I have a 2007 chevy 2500HD new style truck, For
I have a 2007 chevy 2500HD new style truck, For awhile it has been telling me the trailer brake system needs service, finally got a trouble code to pop up...C0131...online research told me it could be a bad brake pressure module also that if I bleed out the brake system it may take care of the problem. The brake seam to work fine but my question is that when I hooked up the pneumatic bake bleeder to the calipers I got a slow steady stream of old dirty brake fluid coming though the bleeder line on the rear wheels and front passenger, when I got to the front driver side I got excessive air in the bleeder line when I pulled the trigger, not a steady slow stream...any idea what make that … read more
Roy
Roy
shop foreman
Associate Degree
5,116 satisfied customers
I replaced the master cylinder and brake booster on a 2012
I replaced the master cylinder and brake booster on a 2012 chevy impala with abs brakes now I cant get a brake pedal manuly bled brake system also performed auto bleed with scanner no signs of air com… read more
Juan Crespo
Juan Crespo
Sr. Technician
Bachelor's Degree
1,262 satisfied customers
I have a 2008 Chevy Silverado 4x4. Just replaced brakes all
I have a 2008 Chevy Silverado 4x4. Just replaced brakes all the way around and the 2 rear wheel cylinders on the rear brakes. I have bled the brake at at all four wheels in the order given in Chiltons… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
Chevrolet Tahoe 4x4: i have a 1996 chevy tahoe i changed the
i have a 1996 chevy tahoe i changed the rear breaks and wanted to change the fluid and bleed the breaks i tried to thinking it would be like my others NOT my chiltons says ther is a presure bleeder va… read more
Eric
Eric
Retired
N/A
36,681 satisfied customers
Chevrolet Tahoe LT: I replaced a front caliper on 2007 Tahoe.
I replaced a front caliper on 2007 Tahoe. Bled the brakes and they felt spongy. Started by bleeding just the front. Bled the master cylinder in case air got in it somehow. Lost all pedal. Bled all fou… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,367 satisfied customers
Chevrolet K3500 4x4: Hi I hope someone can help me with this.
Hi I hope someone can help me with this. 1st off I'm a HD mechanic with many brake jobs , large and small behind me . I recently replaced the front calipers,rotors and pads on my 2000 Chev single whee… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
Chevrolet Astro: 2005 Chevy Astro Cargo Van, 2 WD, 4.3 L V-6,
2005 Chevy Astro Cargo Van, 2 WD, 4.3 L V-6, I just changed my front driver's side brake caliper as I suspected some drag on the old inner pad.. I bled almost a quart of new fluid through the systewm … read more
MasterTech509
MasterTech509
268 satisfied customers
1997 chevy: just put pads and rotors..spongy pedal what else can i try
i have a 1997 chevy trk just put pads and rotors on it and new shoes blead the breaks and new master cylinder re blead the breaks and still have a spongy pedal what else can i try… read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
Chevy K1500 96 Chevy K1500 with kelsey hayes ABS - brake bleeding I
96 Chevy K1500 with kelsey hayes ABS - brake bleeding I replaced a rusty/leaking rear brake line up to the front axle fitting, but the front reservoir level got low & I think air may have gotten into … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,493 satisfied customers
1995 chevy: s-10 4x4..rear brakes..bled the brakes..rear wheel
I have a 1995 chevy s-10 4x4 and the rear brakes refuse to work. I have bled the brakes and I get fluid out of the rear. I have replaced the rear wheel cylinders and shoes. If I raise the rear wheels … read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,659 satisfied customers
1999 chevy suburban 1500: mileage..master cylinder..bled..brake pedal
I have a 1999 Chevy Surburban 1500. mileage 110,000 I have replaced the master cylinder and have bled the brake fluid, but the brake pedal still has a lot of play before engaing the brakes. Some one s… read more
Steve
Steve
Service Manager/ Technician
5,473 satisfied customers
peddle..Replaced lines,hose,brake shoes and adjusted rear brakes
1999 K3500 brake peddle soft after rear line failure. Replaced lines,hose,brake shoes and adjusted rear brakes and bleed system.peddle still soft what did I miss. Thank for your assistance. Joe… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,367 satisfied customers
I HAVE A 1995 CHEVROLET K1500 Z71, I HAD THE REAR BRAKE LINE
I HAVE A 1995 CHEVROLET K1500 Z71, I HAD THE REAR BRAKE LINE ROT OUT SO I REPLACED THE BROKEN SECTION, NOW MY BRAKE LIGHT IS ON AND I WAS UNABLE TO GET THE REAR BRAKES TO BLEED OUT, WHEN I BROKE THE B… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,493 satisfied customers
1996 Monte Carlo: brakes..The front left and right rear wheels..rotor
The brakes on my 1996 Monte Carlo are malfunctioning. The front left and right rear wheels do not brake. I had to replace the front left rotor and front pads do to severe wear, but the front right loo… read more
Eric
Eric
Retired
N/A
36,681 satisfied customers
1997 gmc: 4x4..I replaced the vacuum booster bled all brake lines.
I have a 1997 gmc z-71 4x4 1500 hi-sierra. I had a swooshing sound when applying rakes. I replaced the vacuum booster bled all brake lines. The brakes are still a little mushie. I did not bench bleed … read more
GM-Frank
GM-Frank
Lead Technician
37 years Automotive Repair Exp.
278 satisfied customers
1994 Chevy: unsure of the process to bleed the brakes.
I have a 1994 Chevy Pickup 2WD. I am unsure of the process to bleed the brakes. I see that the combination valve should be held in place. With the rubber cap off of the valve I notice that a pin comes… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
I have a 1992 2500 2+4 -ck- i am..bleed..brakes..depress..abs
I have a 1992 2500 2+4 -ck- i am not familiar with the right way to bleed the brakes when you have to depress the valve on the combo-valve?-cover on off truck onoff-rear abs-no height senseproprtvalve… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
special: to get the air out of the abs unit..Not a code reader
Hello, Hate to have to tell you, but there is a special bleed procedure to get the air out of the ABS unit and it requires the use of a scan tool to do it. Not a code reader, a real scan tool. The uin… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

16,004 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,659 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,977 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

3,023 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x