Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
1987 K5 swap over from 305 V8 to 350 V8 and I'm having
1987 K5 swap over from 305 V8 to 350 V8 and I'm having trouble setting the timing. I have #1 piston set. distributor set. but should I be at TDC or 8 degrees ATDC? same harmonic balancer from 305 engine. … read more
Canuck Tech
Canuck Tech
Associate
501 satisfied customers
2003 Silverado 2500hd crew cab. Rear passenger door ajar
Hi 2003 Silverado 2500hd crew cab. Rear passenger door ajar light is on even after closing. Replaced with aftermarket latch and problem continued then replaced with oem latch. It worked as normal for … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
9,424 satisfied customers
Chevrolet S10 Blazer: I have a 1994 Chevy s10 blazer, it worked
I have a 1994 Chevy s10 blazer, it worked fine. Started right up with no issues, It had small intake and valve cover oil leak. So I decided to replace the gaskets I took the lower and upper intake als… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
10 Blazer: im working..4.3 vortec motor..intake manifold..timing
I'm working on a 1994 Chevy S-10 Blazer. It has the 4.3 Vortec motor with the CPI unit. I replaced the intake manifold and need to reset the base timing. My Haynes book says some weird things (to me) … read more
robert legowski
robert legowski
2,067 satisfied customers
1995 Chevy Suburban: c1500..the timing is off because it..rough idle
I just reinstalled my engine in my 1995 Chevy Suburban c1500 5.7. I blieve the timing is off because it has a very rough idle. The vehicle runs but it does not idle properly. What is the Mfg. specifie… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,914 satisfied customers
Chevy: ton..i changed the distributor and a few other things..timing
i have a 1990 1 ton chevy with a 454. i changed the distributor and a few other things on it recently. but i cant get the timing right. i can see the timing mark my the tab but it wont drive. it will … read more
Tim's Auto Repair
Tim's Auto Repair
mechanic
High School or GED
8,977 satisfied customers
1994 chevy: 1500 4x4..disconnect..the hood says zero degrees
I have a 1994 chevy 1500 4x4 with a 5.0 .I,m ready to set timing but I can,t seem to find the tan/black wire I need to disconnect to use my stobescope.Also what is the number of degrees I should set t… read more
Tim's Auto Repair
Tim's Auto Repair
mechanic
High School or GED
8,977 satisfied customers
TIMING ON MY TRUCK AND I NEED TO KNOW HOW FAR OFF TOP DEAD CENTER
IM TRYING TO SET THE TIMING ON MY TRUCK AND I NEED TO KNOW HOW FAR OFF TOP DEAD CENTER THE MARK SHOULD BE… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,873 satisfied customers
1991 chevy: spec to set the base timing..my service manual - Funny
1991 Chev c1500 5.7 Auto - I need the spec to set the base timing - the under hood sticker is gone. i just checked my service manual - Funny, it refers me back to the under hood sticker. :-)… read more
Don - Mo Lurch
Don - Mo Lurch
Auto Mech / Electronics
Vocational, Technical or Trade Scho
3,023 satisfied customers
1988 chevrolet: stop cranking..timing..exhaust..catalytic conv.
1988 chevrolet K1500 5.7 liter Starts right up (it does stop cranking like the timing is advanced before it actually starts) and then dies a few minutes later. Compression is at 180/cylinder, timed it… read more
frank
frank
Vocational, Technical or Trade Scho
1,892 satisfied customers
1991 Chevy: half ton..intake manifold gaskets..fuel pump will not shut
fuel pump on 1991 Chevy half ton with 5 point 7. I replaced intake manifold gaskets and reinstalled everything. All works fine but fuel pump will not shut off when key is removed. Do need to take to r… read more
Carfix4you
Carfix4you
Lead Technician
Associate Degree
412 satisfied customers
What is the correct base timing for a 93 S10 blazer with a
What is the correct base timing for a 93 S10 blazer with a 4.3L and a Vin W, once the Tan wire is disconnected?… read more
Carhelp4u
Carhelp4u
GM Service Training
2,560 satisfied customers
93 chevy: whats..timing set..disconnect..the coil but dont know
on a 93 chevy 1500 4*4 whats the timing set at and where is the single wire they say 2 disconnect i have one that is atached to the coil but dont know where the other end is to connect?… read more
Dave Nova
Dave Nova
Chevrolet Technician
Associate Degree
7,092 satisfied customers
1987 Chevy: a 350 and throttle body injection..timing..spark
I have a 1987 Chevy R10 truck with a 350 and throttle body injection. The timing is off so I need to reset it. If I understand correctly, I need to do this with the spark advance off. Does this mean d… read more
Roadside Jerry
Roadside Jerry
Auto Expert on Just Answer
Vocational, Technical or Trade Scho
2,945 satisfied customers
my truck..new plugs, wires cap rotar, fuel filter air filter..timing
my truck seems sluggish and inconsistant at mid thru high rpm. has new plugs, wires cap rotar, fuel filter air filter. sometimes during cruising the truck seems to bog down a wee bit so i was wonderin… read more
Dan
Dan
Auto Technician
Associate Degree
The timing with tan wire disconnected and set it at 0 deg..Whit
No to the weak spark I have inermint spark. Yes I checked the timing with tan wire disconnected and set it at 0 deg. Whit the tan wire connected the timing is at 17 deg. at 600rpm - 28deg at 2000rpm. … read more
Expert
Expert
black stripe behind the relay cover on the firewall..bypass..timing
My book says to find a tan wire with a black stripe behind the relay cover on the firewall. I can't find any such wire. I have to find this connection in order to bypass the EST so I can set the timin… read more
Don - Mo Lurch
Don - Mo Lurch
Auto Mech / Electronics
Vocational, Technical or Trade Scho
3,023 satisfied customers
95 chevy s10: vin..the timing plate has a v notch, and i..flywheel
i have a 95 chevy s10, 4.3L,z vin code. i am struggling with the timing. the timing plate has a v notch, and i can align the mark on the flywheel. ive disconnected the set timing connector, but the tr… read more
ttiger79
ttiger79
Auto Mechanic
High School or GED
880 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

16,004 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,659 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,977 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

3,023 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x