Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
chevy camaro: i was woundering the tallest widest tires i can
i was woundering the tallest widest tires i can upgrade to ? i changed from 16 to 18 inch wheels... Original Equipment Size: 245/50-16… read more
Chris (aka- Moose)
Chris (aka- Moose)
Vocational, Technical or Trade School
52,589 satisfied customers
My 2000 Chev S10 6Cyl had an engine warning light that indicated
My 2000 Chev S10 6Cyl had an engine warning light that indicated the transmission solenoids were faulty. I replaced them and reset the warnings. When I tested the old solenoids, they showed 22 ohms, w… read more
Jerry Newton
Jerry Newton
Vocational, Technical or Trade Scho
5,406 satisfied customers
rear end..3.90 or 4.10) for more acceleration..cruising at 80 mpg
Thanks. Any suggestions on rear end gears. I beleive I have 3.42 gears and am considering taller gears (3.90 or 4.10) for more acceleration off the line, but dont want my rpms getting too high when cr… read more
Neal
Neal
Auto repair pro, 30 years experience
Associate Degree
8,213 satisfied customers
chev..4x4..Cant keep plastic hubs tight on wheels...part is factory
Just bought 2005 chev 3/4 4x4 hd. Cant keep plastic hubs tight on wheels. Local dealer looked my vin# XXXXX and every part is factory. Replaced plastic lugs on covers and nuts still have problems. Its… read more
GM Tech (Cam)
GM Tech (Cam)
Chevy Technician
Vocational, Technical or Trade Scho
15,756 satisfied customers
s10: front end..unbolted and broken the gasket seal on the oil pan
1998 chev. s10 p/u. I've raised the front end 8 inches, drained the oil and removed filter - unbolted and broken the gasket seal on the oil pan, but without doing something more cannot remove pan. Nex… read more
David
David
GM Chevrolet Auto Mechanic
Associate Degree
155 satisfied customers
1996 chevy s10: trying to wire a lt1 wiring harness...any
trying to wire a lt1 wiring harness to my 1996 chevy s10. i have both wiring harnesses from the s-10 and the caprice. i know that there is PAINLESS but it doesnt make sense when i have the harnesses f… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,121 satisfied customers
1993 chevy s10 BLAZER: VORTEX..CAR SAT..WE HAVE DRIVEN IT
I HAVE A 1993 CHEV S10 BLAZER WITH A VORTEX. PREVIOUSLY TO PURCHASING THE CAR SAT ON AND OFF FOR 2+ YEARS. WE HAVE DRIVEN IT NOW FOR ABOUT 1+ YEARS. IN THE LAST YEAR WE HAVE CHANGED THE OIL AT LEAST 3… read more
Paul M ASE Master
Paul M ASE Master
Automotive College
4,537 satisfied customers
82 chevy k20 4x4: 6.2 diesel engine, what..rear main..oil seal
I have an 82 Chev k20 4x4 w/6.2 diesel engine, what has to be removed to replace the rear main oil seal? Is it necessary to remove the transmission?… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
12,806 satisfied customers
95 blazer: v-6.., high mileage..old school last engine swap 55 chev
I have a 95 blazer,v-6, comp.on right side 160 left side #1-70 #2 -0#3-40 lb I don't know if I will fix it or not , high mileage I have 2- 80ish 350 complete engines, what will I have to change to put… read more
cartech
cartech
master tech
High School or GED
3,324 satisfied customers
1995 Ls: s10..wheel drive..pickup..fuel pump..gas gauge reads 1/4 tank
i have a 1995 Ls s10 2dr 4.3 engineXXXXXpickup . someone changed the fuel pump and sender unit and now when gas gauge reads 1/4 tank the truck runs out of fuel everytime… read more
ZZDaryl
ZZDaryl
Lead Auto Tech
Some college and advanced training
11,465 satisfied customers
2002 chevy blazer: front end..engine oil..dipstick..oil pan
My dad noticed a large pool of oil (unknown type) beneath the (centre) front end of my 2002 Chev Blazer last night. I checked the engine oil last night and it was down about 1/4 inch on the dipstick b… read more
rdundrea
rdundrea
Shop Foreman
High School or GED
2 satisfied customers
Chevy: the rotors or brakes at all on the front end..rims
when lowering a 77 1/2ton chevy stepside do you have to mess with the rotors or brakes at all on the front end? Do you have to put different rims on it other then stock when using a spindle 2" drop in… read more
im-not-guilty
im-not-guilty
technician
Vocational, Technical or Trade Scho
54 satisfied customers
51 Chevy: Chassis..My question is, which GM rear end can I..axle
My 51 Chevy presently has the original running gear which I am changing over to a 350/700R combination after I install a Chassis Engineering Inc. front suspension. My question is, which GM rear end ca… read more
toolpusher08
toolpusher08
High School or GED
84 satisfied customers
Chevy: mileage..lower wind resistance, put taller tires on it..RPM.
I have a 2008 HHR chevy with the 2.2 engine. I am looking to improve the mileage as much as possible. I have already lowered the car 2 inches all the way around to lower wind resistance, put taller ti… read more
Triston
Triston
High School or GED
1,613 satisfied customers
2003 chevy venture: van..6525) It has happened 3 times in 18 month
2003 chev venture van has lost all oil as a result of Sensor Detector (71-6525) It has happened 3 times in 18 monts.… read more
Jesse
Jesse
GM master Technician
Vocational, Technical or Trade Scho
118 satisfied customers
Oil pressure drops to around 10-20 psi after 3K rpm..pan..crank
Hello, Gen 4 454 has an M77 oil pump with 65-70 psi @ idle / cold or hot, oil pressure drops to around 10-20 psi after 3K rpm. Bring back to idle / 65-70 psi immediately. There is 3/8 clearance off th… read more
John
John
Master A.S.E Automotive technician
2 YEARS COLLEGE
4,071 satisfied customers
2 oil pan gaskets an the 2 have leak what am i doing wrong
i have instaled 2 oil pan gaskets an the 2 have leak what am i doing wrong...... they leak at the rear… read more
Kyle N.
Kyle N.
Automotive Technician
Vocational, Technical or Trade Scho
5,222 satisfied customers
i have a newer style 4.3 vortec with the cast aluminum oil ...
i have a newer style 4.3 vortec with the cast aluminum oil pan and am wondering if i can put it in a 93 s-10 blazer. It doesnt look like it will clear the differential to me. Also is there a different… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

15,756 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,642 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,884 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

2,953 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Ron Z.

Ron Z.

- Chevy Tech -

2,836 satisfied customers

18+yrs experience. State Inspector and Chevy Diagnostics

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x