How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Chevy Technician
Category: Chevy
Satisfied Customers: 18051
Experience:  15 years GM master tech
19513769
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

ABS question on 2006 2500 HD Silverado. I want to know if I

Customer Question

ABS question on 2006 2500 HD Silverado
JA: Have you checked the brake fluid? And have the brakes been squeaking?
Customer: I want to know if I need to program ABS module after changing a failed sensor
JA: Are you fixing your Silverado yourself? What have you tried so far?
Customer: Yes Replaced sensor with broken wire. Now the vehicle engages ABS module on that wheel when I am braking and drop below 20 MPH
JA: Anything else you want the mechanic to know before I connect you?
Customer: I think that's it
Submitted: 7 months ago.
Category: Chevy
Expert:  Gary replied 7 months ago.

Welcome! My name is ***** ***** I will do my best to assist you with this problem.Ask me about added features such as phone contact anytime if you wish !

Expert:  Gary replied 7 months ago.

no there is no programming when changing a wheel speed sensor

if you have any questions please askplease do not forget to rate me here at Justanswer
Customer: replied 7 months ago.
If my abs is engaging do i need to replace module?
Expert:  Gary replied 7 months ago.

usually with unwanted ABS activation of is one of the front ABS sensors or one of the front hub/bearings are bad causing this issue

Expert:  Gary replied 7 months ago.
if you have any questions please askplease do not forget to rate me here at Justanswer
Customer: replied 7 months ago.
Mu wheel bearing is good and my sensor is new. Is there a way to check module?
Expert:  Gary replied 7 months ago.

depends on the codes set in the computer

never had to replace a module for this issue'it is a front bad hub right or left front or a front let front or right front sensor causing this issue

if you have any questions please askplease do not forget to rate me here at Justanswer