Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Just swapped a small 2bbl card for a quadra jet on my 1980…

Customer Question
Just swapped a small...

Just swapped a small 2bbl card for a quadra jet on my 1980 C60. Starts right up but is idling super super high.

Mechanic's Assistant: How many miles are on the car? What size is the engine?

Its a chevy 350, and has apron 90k

Mechanic's Assistant: What is the model of your '80 Chevy?

C60 dump truck

Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far?

Yes I'm doing it myself, and I have tried adjusting the tuning screws, and have checked for various vacuum leaks.

Submitted: 11 months ago.Category: Chevy
Show More
Show Less
Ask Your Own Chevy Question
Answered in 1 minute by:
9/20/2017
Chevy Mechanic: Roy, import/domestic specialest replied 11 months ago
Roy
Roy, import/domestic specialest
Category: Chevy
Satisfied Customers: 7,924
Experience: ASE master tech for 40 years
Verified

hello, my name is ***** ***** I will be glad to assist you. please allow me a couple of minutes to gather some basic info.

Roy

Ask Your Own Chevy Question
Chevy Mechanic: Roy, import/domestic specialest replied 11 months ago

did you back off on the idle stop screw???

did you change the intake???

Ask Your Own Chevy Question
Chevy Mechanic: Roy, import/domestic specialest replied 11 months ago

are you there

Ask Your Own Chevy Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a chevy mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15,659
15,659 Satisfied Customers
Experience: GM Grand Master Technician 2007. 14 years experience.

GM Tech (Cam) is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

15,659 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,642 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,884 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

2,953 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Ron Z.

Ron Z.

- Chevy Tech -

2,836 satisfied customers

18+yrs experience. State Inspector and Chevy Diagnostics

< Previous | Next >

Related Chevy Questions
Truck stalls when making any turn. No check engine light.
No check engine light. The truck wants to die at idle until gets warmed up, then it just runs sloppy and tries to die but doesn't. Usually dies when making a turn or slowing down. 350 chevy carbed automatic … read more
Jared D
Jared D
Shop Supervisor
Bachelor\u0027s
3 satisfied customers
I bought a Lamborghini kit car with a small block Chevy 350
I bought a Lamborghini kit car with a small block Chevy 350 and we got it to run but now I want to do a tuneup on it. It has a Edelbrock carburetor how do I adjust the carburetor and is there anything… read more
heavy_chevy_396
heavy_chevy_396
Vocational, Technical or Trade Scho
2,518 satisfied customers
I have a small amount of fuel leaking from the throttle body
I have a small amount of fuel leaking from the throttle body of my Edelbrock carb (I believe that its the throttle body, which is on the same side of the carb as the choke), that sits on a Chevy 350 S… read more
Gary
Gary
Senior Technician
Vocational, Technical or Trade School
102 satisfied customers
Chevrolet c60: I have a 1985 chevy c60 dump truck with a 350
I have a 1985 chevy c60 dump truck with a 350 engine.It back fires through exhaust only in 4th gear high if I let off accelerator fast.I have adjusted screws on carb and advanced/retarded distributor … read more
Gary
Gary
Chevy Technician
Vocational, Technical or Trade Scho
9,642 satisfied customers
Chevrolet Cheyenne (K10): I have a 78 Chevy Cheyenne 350 with
I have a 78 Chevy Cheyenne 350 with a/c. I recently replaced the intake manifold gaskets and replaced thebold quad with a 1406 edelbrock. Got everything put back together and theres a few issues. 1) A… read more
ClayA
ClayA
Automotive Technician
Vocational, Technical or Trade School
107 satisfied customers
1975 Chevy k10: distributor..spark plugs, cap and rotor and new wires
i have a 1975 Chevy k10 with a 350, new Edelbrock carburetor the shop said it was missing and wasn't passing high speed emissions test due to high hydro carbons. My truck has a hei distributor and the… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
1,314 satisfied customers
I have a 1984 corvette with a 350 ci and a holly 4bbl. carb.
I have a 1984 corvette with a 350 ci and a holly 4bbl. carb. I had the carb rebuilt now i need to tune it up,where are the high and low jets located and how do you adjust them so the car doesnt run ro… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
1,314 satisfied customers
1968 Impala: idle drops..stalling..Aug. 2010, had a rebuilt 4
Purchased a 1968 Impala 327 cu. The seller let me know that there is an idling issue where the idle drops, and at times to the point of stalling the car. He recently, Aug. 2010, had a rebuilt 4-barrel… read more
joeplow
joeplow
Retired-Disabled
Master Aamco
1 satisfied customers
1985 chevy c30 with 350 eng. no cat. backfires thru exhaust
1985 chevy c30 with 350 eng. no cat. backfires thru exhaust after you turn key off, why. if i let it idle for a few mins. first it doesnt… read more
Ironmike
Ironmike
ASE Master L1 performance ,Ford tech
Vocational, Technical or Trade Scho
1,773 satisfied customers
1985 GMC: sputters..Timing is dead on, carb seems to be adjusted
New edelbrock 600 carb installed on 1985 GMC 1500, engine sputters when turning off and has less power than before? Timing is dead on, carb seems to be adjusted properly (only has two adjustments) - w… read more
frank
frank
Vocational, Technical or Trade Scho
1,892 satisfied customers
my emission test..1991 silverado 350 cid 4x4 with a/c
did not pass my emission test failed idle need to know how to adjust idle on 1991 silverado 350 cid 4x4 with a/c… read more
John
John
Master A.S.E Automotive technician
2 YEARS COLLEGE
4,071 satisfied customers
87 camaro: hey..carb..350 stays at a high idle..warmed
hey my 87 camaro with a carb. 350 stays at a high idle even after its warmed up. suggestions?… read more
Steve7654
Steve7654
Service Manager/ Technician
4 satisfied customers
1985 chevy: motor home..start it , The engine races to about 6000 rpm
I have a 1985 Chevy Motorhome.It has a 350 motor with a 4 barell carburator.WhenI go to start it,The engine races to about 6000 rpm's.What could it be that causes that.… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
89 chevy: ton..carb on it..distributor hold down bolt
I have a 89 chevy half ton pick-up with a newer ( 96 ) vortec engine , but has a carb on it . It diesels like heck everytime I try to shut it off , I have been told I need to retard the timing , but I… read more
Gary
Gary
Shop Foreman
Vocational, Technical or Trade Scho
212 satisfied customers
83 chevy: it runs fine, but it makes a clicking sound..timing..adjust
I got a 83 chevy c-20 3/4 ton 350hp and it runs fine, but it makes a clicking sound when running i think it is a timing issue, how can i adjust the timing… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
1986 chevy: 4x4..700r4 trans with a 1982 350 hp motor that I rebuilt
On 1986 chevy k5 4x4, 700r4 trans with a 1982 350 HP motor that I rebuilt. Why must the motor temp be at 150* or more for the truck to move? Under 150* the truck will cut off after its in gear and I t… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
1980 camaro: an edelbrock 1405 manual choke carb..distributor
I have just Installed an edelbrock 1405 manual choke carb on my 70ish 350 in my 1980 camaro. The engine has a HEI distributor and I am unsure which port on the carb for the vaccume advance I am suppos… read more
frank
frank
Vocational, Technical or Trade Scho
1,892 satisfied customers
1980 chevy malibu: v6..car starts..throttle position sensor
1980 chevy malibu 3.8 229 cid v6 2bbl (K)troubleshooting: Had rebuilt carburetor replacement; car starts, but with a high idle then a flooded carburetor! What is the remedy? I don*t know if the idle s… read more
supermechanic
supermechanic
Service consultant
Vocational, Technical or Trade Scho
10 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x