How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I have a 2002 Silverado w/4.3L 262 2 wheel drive. I replaced

Customer Question

I have a 2002 Silverado w/4.3L 262***** I replaced the motor with same. After bolting the motor and trans together I cannot get the 2 to sit in the vehicle straight. I had it straight finally and bolted in. I took a break and after returning an hour later I found the 2 sitting on an angle again, trans against the passenger side. Why is this happening? I've gone over it with a fine tooth comb and can't make it work. Motor mounts look fine,
JA: Besides this, what condition is the car in?
Customer: its in great shape, everything was working well until the head gasket went, over 317,000 miles on the vehicle
JA: Are you fixing your Silverado yourself? What have you tried so far?
Customer: I am. I've unbolted the mounts from the motor and truck several times while motor supported by an engine lift.
JA: Anything else you want the mechanic to know before I connect you?
Customer: I don't think so, thank you
Submitted: 2 months ago.
Category: Chevy
Expert:  Gary replied 2 months ago.

Welcome! My name is ***** ***** I will do my best to assist you with this problem.Ask me about added features such as phone contact anytime if you wish !

Expert:  Gary replied 2 months ago.

what will not sit straight ?

can you upload some pictures for me to see ?

Expert:  Gary replied 2 months ago.

let me know