How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric, Automotive Repair Shop Manager
Category: Chevy
Satisfied Customers: 32085
Experience:  20+ yrs. experience as repair shop manager and technician.
Type Your Chevy Question Here...
Eric is online now
A new question is answered every 9 seconds

Trying to replace fuel control module in 2009 colorado,

Customer Question

trying to replace fuel control module in 2009 colorado
JA: Has the vehicle turned into a gas hog? And how does it start -- same as usual?
Customer: doesn't start.. the screws holding it in is a 4mm star socket...head of screw up on top cant get to it
JA: Are you fixing your Colorado yourself? What have you tried so far?
Customer: yes, unable to loosen screws
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 7 months ago.
Category: Chevy
Expert:  Eric replied 7 months ago.


Check the bottom side again as those bolts are supposed to 2 sided meaning bolt heads on both sides and able to loosen them from the bottom and then slide the module so the top bolt heads will come out of the keyhole slots