How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, ASE Certified Technician
Category: Chevy
Satisfied Customers: 1694
Experience:  Auto Technician
Type Your Chevy Question Here...
Dan is online now
A new question is answered every 9 seconds

Rear window wiper motor out of sequence, Yes it cycles but

Customer Question

Rear window wiper motor out of sequence
JA: Have you checked the fuses? Do you know if there is power to the wiper motor?
Customer: Yes it cycles but it stop and start poison is not correct
JA: What is the model/year of your Chevy?
Customer: 2006 trail blazer
JA: Are you fixing your Blazer yourself? What have you tried so far?
Customer: yes , the motor cycles slow but it cycles , I have tried changing the stop and start point but success
JA: Anything else you want the mechanic to know before I connect you?
Customer: Is there a process to put the motor back on sequence
Submitted: 9 months ago.
Category: Chevy
Expert:  Dan replied 9 months ago.

Hello, my name is ***** ***** I am glad to help.

The wiper arm may have come loose. Remove the nut and rear wiper arm, install in the correct position and tighten. The rear wiper motor may also need to be replaced. You will need to remove the rear trim panel to gain access to the wiper motor.

Please reply to this if you need more help and we can continue this conversation. This does not have to be my only answer. If you are satisfied with my service, please rate at the top of the screen. Rating does not close out your question. Remember, sometimes it is difficult to completely diagnose your vehicle without being there, but I will try to give you the best answer I can. Hoping to be giving you 5 star service

Customer: replied 9 months ago.
Ok thanks I though got it was one of the two items . I also believe there should be a stop and start position for the motor it seems to vary. This could be the movement of the are on the motor I assume
Expert:  Dan replied 9 months ago.

There is a start and stop position, if the wiper arm is not lined up it would cause your problem.

Expert:  Dan replied 9 months ago.

Hello again Dan here,

I am contacting you because the post has not been closed or rated.

This question is coming up on 7 days which means it will time out and close.

You have already paid to get this question answered, but you have not rated.

Let me help some more. Is there anything else I can help you with?

If I did not give you 5 star service, please let me know what I missed.