How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, Chevy Technician
Category: Chevy
Satisfied Customers: 17035
Experience:  15 years GM master tech
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

02 Chevy Blazernot working replaced push button assembly

Customer Question

02 Chevy Blazer*****not working replaced push button assembly still no good , no lights on push buttons at all
Submitted: 8 months ago.
Category: Chevy
Expert:  Gary replied 8 months ago.

Welcome! My name is ***** ***** I will do my best to assist you with this problem.Ask me about added features such as phone contact anytime if you wish !

Expert:  Gary replied 8 months ago.

when you first key up the ignition do the case position lights bulb check for a second then all shut off ? or no bulb check at all ?

Customer: replied 8 months ago.
No lights at all. But I just found blown ATC fuse. Replaced it, tried to start car, lights were coming on, but battery died. I have been starting many times today. It is on charger now
Expert:  Gary replied 8 months ago.

yes usually with no lights at all a fuse is blown

it should work fine for you

if that fuse blows again the odds are the 4WD module is bad or the connection at the module or the terminals at the modules connector are bad

please dont forget to rate me here at Justanswer

you can always get me back for FREE for any follow up any time with this question even after you rate me here at Justanswer

if you have any questions please ask as i do not get credit for my work until you rate me here at Justanswer