How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Chevy
Satisfied Customers: 47601
Experience:  16 years of experience
Type Your Chevy Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

I need to identify the following electrical wire color(s)

Customer Question

I need to identify the following electrical wire color(s) and their location:
1. Tail lights
In the tail light wire harness located on the floor at the gear shift, directly below the instrument center support bracket. the tail light power wire and the back up light power.
2. The fog light switch.
I located the connector for the fog light switch, taped up in the harness, at the water fall. Where does the wire go from there. ( the vehicle DID NOT have fog lights and I want to use the existing, unused wires to install a set). Does it end at another taped up connector or does it run all the way to the correct location in the fuse box under the hood?
Submitted: 8 months ago.
Category: Chevy
Expert:  Chris (aka-Moose) replied 8 months ago.

Welcome, I'm Chris (aka Moose), my normal schedule online is around lunch and after dinner past midnight.

  • Sorry no one has helped yet for the question fees you have already paid.
  • I can help with this question.
  • Reply and let me know when your able to work on this concern.
Customer: replied 8 months ago.
I'd given up on you guys. What can you tell me.
Expert:  Chris (aka-Moose) replied 8 months ago.

Here are the wire diagrams I have, is this what you needed?

What now

  1. You have asked a question.
  2. You have paid a deposit and received an info request and or answer(s).
  3. Now it is time to follow up if needed or rate my answer, hopefully 5 STAR EXCELLENT. Sometimes the rating fails, responding with (I am a pleased) will suffice.
  4. You are more than welcome to still follow up. I want you pleased with me and my answer(s).

Thanks for using Just Answer, and rating me so I am compensated, Chris

Customer: replied 8 months ago.
Tks for the diagrams. Did you have any thoughts about the unused wires to the fog light switch?
Expert:  Chris (aka-Moose) replied 8 months ago.

I can not confirm where those wires you found go without visibly following them and testing them at both ends. The diagrams do not show if they are connected ready to go and be used.

Customer: replied 8 months ago.
I'll take a hunch. I'm going on my experiences from my Cadillac days. GM never made more than one wire harness for any vehicle. They just don't hook up the options you don't buy. Since I'm sure the plug I found is for the fog lt Switch I'm just wondering if it runs through the fire wall so I don't need to make a hole for my switch.
Expert:  Chris (aka-Moose) replied 8 months ago.

You can ohm test it from both ends to see if its does.

Customer: replied 8 months ago.
That was my plan "B" if I didn't resolve it here. Tks anyway.
Expert:  Chris (aka-Moose) replied 8 months ago.

Sorry you were not pleased with my help. So I need to request the post be closed?

Customer: replied 8 months ago.
Some days you get the bear, some days the bear gets you.
Expert:  Chris (aka-Moose) replied 8 months ago.

Thanks, ***** ***** request the post to be closed.

Best of Luck.