How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Super Mechanic Your Own Question
Super Mechanic
Super Mechanic, Master technician
Category: Chevy
Satisfied Customers: 17218
Experience:  29 yrs. exp., ASE master, cert. in G.M. electrical, a/c, susspension, brakes, electronic steering
Type Your Chevy Question Here...
Super Mechanic is online now
A new question is answered every 9 seconds

S10 keeps blowing turn signal fuse immediately after

Customer Question

S10 keeps blowing turn signal fuse immediately after installing
JA: Do all the fuses have the correct amperage for the circuits they're in?
Customer: Yes they do it's a 15 amp fuse
JA: Are you fixing your S10 yourself? What have you tried so far?
Customer: Well I disconnected the harness to the tail lights put in a new fuse it's still blew
JA: Anything else you want the mechanic to know before I connect you?
Customer: Where can I test from fuse panel to the front and fuse panel to the rear of vehicle and what else should I check
Submitted: 8 months ago.
Category: Chevy
Expert:  Super Mechanic replied 8 months ago.

Hello and welcome. My name is ***** ***** you for visiting the site, I am reviewing your question and will reply shortly, thanks.

Expert:  Super Mechanic replied 8 months ago.

What year?

Customer: replied 8 months ago.
1995 S10
Expert:  Super Mechanic replied 8 months ago.

I see, thanks.

Let me just say that any money that you paid, or if you have a subscription, that money stays in your account until the answers are rated, (positive) regardless of how fast or how long it may take to get finished. You can FOLLOW UP AT ANYTIME, even after rating.

That is most times in the switch when the fuse blow right away. Best way to check is to unplug the harness at the bottom of the steering column and see if the short goes away. Connector C201 in the attached diagram, thanks