How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, ASE Certified Technician
Category: Chevy
Satisfied Customers: 1122
Experience:  Senior Technician
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

2010 chevy impala wire on the postive cable broke theirs a

Customer Question

2010 chevy impala wire on the postive cable broke theirs a ring around with a plug whats the name of the plug an will that keep it from starting
JA: Will the headlights turn on? Is the battery fully charged?
Customer: Nothing works key wont turn an no power
JA: Are you fixing your Impala yourself? What have you tried so far?
Customer: Well i turned it off an wouldn't start back up so poped the hood an seen some wires that broke off the positive cable
JA: Anything else you want the mechanic to know before I connect you?
Customer: Just need the name of the wire harness around the positive battery cable
Submitted: 1 year ago.
Category: Chevy
Expert:  Gary replied 1 year ago.

Hi there,

Sounds like you are looking at the battery current sensor?

It is a black ring around a cable?


Expert:  Gary replied 1 year ago.

This may help as well.


Customer: replied 1 year ago.
its just mounted on the cable , would that cause it to not start
Expert:  Gary replied 1 year ago.

Could do, since the BCM monitors battery usage, and it would have codes set now.

Can't say I have ever tried to start one with the current sensor disconnected.

It is fitted to many cars now.

Can we get a scan done as well now?


Expert:  Gary replied 1 year ago.

Hi again,

Do you need any further help?

I hope my advice has been of assistance to you.

Kind regards