How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Master Auto Tech. Your Own Question
Master Auto Tech.
Master Auto Tech., A.S.E. Certified Master Technician
Category: Chevy
Satisfied Customers: 612
Experience:  Over 20 years working on imports and domestic cars
Type Your Chevy Question Here...
Master Auto Tech. is online now
A new question is answered every 9 seconds

I was sitting in a parking lot yesterday and turned the air

Customer Question

I was sitting in a parking lot yesterday and turned the air conditioning on. After about 90 seconds it just stopped. It blows no air at all.
JA: Do the vents feel cold? Is there a coolant leak?
Customer: Vents are not cold
JA: What is the model/year of your Chevy?
Customer: 2005 chevy silverado
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: have tried nothing so far
JA: Anything else you think the mechanic should know?
Customer: No. Just wondering if there is anything I should check before taking it in for service.
Submitted: 1 year ago.
Category: Chevy
Expert:  Master Auto Tech. replied 1 year ago.
I'm sorry you are having problems with your vehicle. I will try to help.I'm a full time mechanic and have been a mechanic for over 20 yrs and I work part-time here on JustAnswer to help you and others repair their own vehicles, and I get credited by your ratings.. So before leaving the site make sure and leave me a rating. You can still reply to me as many times as neeed, even after the rating.. I will need for you to be my hands and eyes since I'm not there.So you can check your blower motor fuse. But the most likely cause is your blower motor resistor. They had a problem with getting hot and melting the connector. Then it won't make good contact and it won't blow at all. There is an updated resistor that comes with a new wiring harness that needs to be wired in. If you remove the plastic cover just above the passenger feet area on the underside of the dash below the glove box you can gain access to the blower motor and the resistor. Try wiggling the connectors on both of them.Let me know if you have any questions.Thanks
Expert:  Master Auto Tech. replied 1 year ago.

I strive to provide 5 star service. If I have satisfactorily answered your question please rate it as such and hit submit. Doing so is the only way I get compensated for my time. Also it doesn't close the discussion so we will still be able to communicate if there are further questions.

Expert:  Master Auto Tech. replied 1 year ago.
Do you still need help with this? Please let me know