How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, ASE Certified Technician
Category: Chevy
Satisfied Customers: 1117
Experience:  Senior Technician
84449473
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

I have a big block chevy how do you set it at 34 degrees

Customer Question

I have a blown big block chevy how do you set it at 34 degrees
Submitted: 1 year ago.
Category: Chevy
Expert:  Gary replied 1 year ago.

Hi John,

What ignition system do you have?

Just a distributor or crank trigger?

Gary

Customer: replied 1 year ago.
M s d
Customer: replied 1 year ago.
Car running hot...
Expert:  Gary replied 1 year ago.

Hi John,

What timing does the engine run at now?

Does it run locked timing?

Can you get at the distributor hold down bolt with a spanner?

I have a special tool for this. They call it a distributor spanner

http://www.ebay.com.au/itm/JEGS-Performance-Products-80560-Distributor-Clamp-Wrench-/310396915757?hash=item484519102d:g:85oAAMXQnXFRZqjT

Gary

Expert:  Gary replied 1 year ago.

Hi John,

Do you need any further help?

I hope my advice has been of assistance to you.

Kind regards

Gary