How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Chevy
Satisfied Customers: 18668
Experience:  GM Tech ASE Master Tech 15+ years
Type Your Chevy Question Here...
George H. is online now
A new question is answered every 9 seconds

What color wires on the front signal lights do I need to

Customer Question

What color wires on the front signal lights do I need to connect my resistor to for the 2011 Colorado
Submitted: 1 year ago.
Category: Chevy
Expert:  George H. replied 1 year ago.

Hello I will help you with your question,

Your front signal lights have a light blue and black wire for the left lamp and the same colors for the right

Let me know what questions you have


Customer: replied 1 year ago.
I am installing load resistors to rid the directional's of they're hyper-flashing since I converted to LED bulbs. The load resistors have a red wire [one out of both ends] and are made by Aaron's.
Expert:  George H. replied 1 year ago.

Does not matter which end of the resistor is connected to which wire. Just connect one end to the blue wire at the lamp connector and the other to the black wire

Please let me know if you have further questions

Thank you