How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask C. Walker, Jr. Your Own Question
C. Walker, Jr.
C. Walker, Jr., Auto Mechanic
Category: Chevy
Satisfied Customers: 711
Experience:  Shop training and experience.
73583367
Type Your Chevy Question Here...
C. Walker, Jr. is online now
A new question is answered every 9 seconds

89 Chevy S 10 Blazer V6 no power to the wire going to the

Customer Question

89 Chevy S 10 Blazer V6 no power to the wire going to the starter all-wheel-drive
Submitted: 1 year ago.
Category: Chevy
Expert:  C. Walker, Jr. replied 1 year ago.

So you have no power on the black wire?

Customer: replied 1 year ago.
No I dont
Expert:  C. Walker, Jr. replied 1 year ago.

This wire comes directly from the battery. You likely have a break in the wire coming from the battery. You can run a brand new wire from the starter positive to the post that the black wire goes to. Unless you can locate the part that is damaged.

Customer: replied 1 year ago.
Selinoid wire I got alarm got disconnected some how
Expert:  C. Walker, Jr. replied 1 year ago.

If you have an aftermarket alarm than this could be why it came disconnected. Make sure you get it reconnected with a good clean connector so this does not happen again.