How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I had the service engine light on while, I took it to

Customer Question

I had the service engine light on for a while, I took it to get diagnosed at the shop. After the service engine light went off, after it was diagnosed I took it to get DEQ and I got a note saying unready for testing. What do I need to do now to get it DEQ ready.
JA: Sometimes things that you think will be really complicated end up being easy to fix with Chevy. The Chevy Mechanic I'm going to connect you with knows all the tricks and shortcuts. Are you hoping to fix this yourself?
Customer: Yes
JA: Great! What have you tried so far?
Customer: Turning the car off and running it to Portland from Gresham and back.
JA: Is there anything else the Chevy Mechanic should be aware of about your Chevy?
Customer: There was a code for the camshaft sensor and the hub sensor
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chevy Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Chevy
Expert:  ironmike replied 1 year ago.
greetings, what codes were in the PCM? Did the fault or cause for the check engine light and trouble codes get fixed? Did you do a drive cycle to clear the monitors?
Expert:  ironmike replied 1 year ago.
what is the model, year ?