How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Chevrolet: i pulled the fuse panel out and put it back in and

Customer Question

i pulled the fuse panel out and put it back in and lost everything as far as starter, headlights, pwr windos, automatic doors , interior lites work and panel lights up when key turned on but nohng after that. i checke some of main fuses, appeared to be ok. wonder if i didn't push the fuse panel back into conectors? i guess i shouda disconenected batery fore i did this
Submitted: 1 year ago.
Category: Chevy
Expert:  CHRIS ZAPANTIS replied 1 year ago.
Hi Im Chris and i can assist
Expert:  CHRIS ZAPANTIS replied 1 year ago.
disconnect battery, make sure fuse panel is in good remove and reinstall sometimes the connectors dont push it. Then connect battery. Im pretty sure its a bad connection and you didnt fry anything