How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Chevy
Satisfied Customers: 18761
Experience:  GM Tech ASE Master Tech 15+ years
Type Your Chevy Question Here...
George H. is online now
A new question is answered every 9 seconds

Chevrolet C1500 4x2: I have a 96 C/1500 2wd. We did a v6 to

Customer Question

I have a 96 C/1500 2wd. We did a v6 to v8 swap carbuerated. I have brake lights at the 3rd brake light but not at the rear I've replaced to date the brake SW, turn sign sw, all the flashers, the circuit boards at the tail lights, and still no brake lights. I have turn and hazard
Submitted: 1 year ago.
Category: Chevy
Expert:  George H. replied 1 year ago.
Hello I will help you with your question, Using a 12 volt testlight or voltmeter check the white wire at the corner of the large connector at the lower end of the steering column for 12 volts when you have the brake pedal depressed. Are you certain the turn switch you installed is correct for this column?