How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

1996 k1500 found faulty ign switch. replaced. now cranks but

Customer Question

1996 k1500 found faulty ign switch. replaced. now cranks but no start. pour some fuel in throttle body, engine runs. fuel psi 60 psi key on
JA: Thanks. Can you give me any more details about your issue?
Customer: runs for 10secs then quits
JA: OK got it. Last thing — Chevy Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Chevy
Customer: replied 1 year ago.
no engine codes with scan tool
Customer: replied 1 year ago.
could there be a passlock or security issue with new ingition switch?
Expert:  Jerry Newton replied 1 year ago.

Not with an ignition switch, exactly, but you were in the vicinity of the passlock module (attached to the lock housing). You didn't replace the lock housing itself, did you? Just the electrical switch?

Customer: replied 1 year ago.
installed a used complete switch and housing from auto recyler
Customer: replied 1 year ago.
i think i know where you are going with this. lol
Expert:  Jerry Newton replied 1 year ago.

Yes, you need to perform a relearn procedure on this. Do you know how?