How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15201
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Yesterday we changed a hydro boost brake booster. we asked

Customer Question

yesterday we changed a hydro boost brake booster. we asked you where the ball bearing went and you said the back hole towards the firewall. we did what you explained but after bleeding the brake system and cranking the truck, the brake pedal was so hard we couldnt push it down, and the electric motor wasnt making a noise like usual, and then hydraulic fluid started dripping on the inside floorboard of the truck..... what could be wrong with the truck???
Submitted: 1 year ago.
Category: Chevy
Expert:  Jared D replied 1 year ago.

Was the little plastic collar in place on top of the check ball?

Part #32 in the diagram.