How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chevy Tech -
Category: Chevy
Satisfied Customers: 18972
Experience:  18+yrs experience. State Inspector and Chevy Diagnostics
Type Your Chevy Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Me name is reinaldo, my issue is how to remove a windshield

Customer Question

me name is ***** ***** issue is how to remove a windshield fluid reservor on 2009 chevy express
JA: Thanks. Can you give me any more details about your issue?
Customer: the washer fluid for the windshield liken
JA: OK got it. Last thing — Chevy Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Chevy
Expert:  Ron Z. replied 1 year ago.

For easier viewing/printing, I've wrapped up the procedure into a PDF file. Download the PDF file here:

If my answer has helped you, please help me by leaving a rating or accepting my answer so I may be credited. Rating or accepting my answer does not cost you extra. It allows me to be credited for my work. Please rate or accept. You can ask follow-up questions after you rate or accept.

Customer: replied 1 year ago.
sorry but this pdf do not answer my quetion. How I need to start, need to take of the grill?
Customer: replied 1 year ago.
your pdf just show the reservoir but do not tell how to remove
Customer: replied 1 year ago.
hello !!??
Expert:  Ron Z. replied 1 year ago.

There shouldn't be any need to remove the grill. The mounting bolts should be accessible without removing any other items. The 2nd image in the PDF has the step-by-step. For example: step 1 is the "front end panel bolt" which is shown in the first image with a "1" pointing to it.

Customer: replied 1 year ago.
I just get one page??
Expert:  Ron Z. replied 1 year ago.

My apologies. Maybe there was an error during the PDF compile. Let me re-compile, and re-upload here:

Customer: replied 1 year ago.
sorry but steel the same no step by step
Expert:  Ron Z. replied 1 year ago.

Let me convert it to images...

Diagram of layout- step numbers point to items in that step here:

step procedure here:

Expert:  Ron Z. replied 1 year ago.

Did you get both images this time?