How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Bob Your Own Question
GM Bob
GM Bob, ASE Certified Technician
Category: Chevy
Satisfied Customers: 1103
Experience:  30 plus years. experience as GM technician, ASE Master Technician and GM Certified.
Type Your Chevy Question Here...
GM Bob is online now
A new question is answered every 9 seconds

I keep blowing my right head light low beam, park lamps/

Customer Question

I keep blowing my right head light low beam, park lamps/ instrument panel dimming fuses along with no steering wheel illumination (that fuse is not blown). Any suggestions?
Submitted: 1 year ago.
Category: Chevy
Expert:  GM Bob replied 1 year ago.

Hello my name is ***** ***** I can help.

Can you post your VIN#

Are you blowing a fuse? If so which one the name of it or the number.

Has there been any recent repairs? Body or mechanical.

Please get back with me.

Thank you

Customer: replied 1 year ago.
Vin# *****
Expert:  GM Bob replied 1 year ago.

Sorry about the delay.

When the right low beam goes out the park and instrument lights go out?

What lights still work?

Do you have any blown fuses?

Customer: replied 1 year ago.
for the first question. I still have drivers side light, brake lights and dash lights. Fuses that blow are the 10 amp in trunk for parking/lower instrument lights and the 10 amp under hood for passenger side low beam
Expert:  GM Bob replied 1 year ago.

Because you are blowing two different fuses.

I would see if you can see any wires damaged on the right side by the headlamp assembly.

Than I would remove the right side headlamp assembly and look at the wires behind it.

Also in spec the wire harness on the assembly. I have found melted connectors.

Let me know what you find.

Thank you