How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask camerontech Your Own Question
camerontech
camerontech, Auto Mechanic
Category: Chevy
Satisfied Customers: 497
Experience:  diagnostic auto tech
89602740
Type Your Chevy Question Here...
camerontech is online now
A new question is answered every 9 seconds

I have a 1998 chevy S10 with a bent prong on the airbag

Customer Question

i have a 1998 chevy S10 with a bent prong on the airbag harness that plugs into the module under the front seat. what can i do without asking the dealership to do everything?
Submitted: 1 year ago.
Category: Chevy
Expert:  camerontech replied 1 year ago.

hi there,

im cam, a licenced diagnostic tech.

bent prongs are not usually an issue, as long as they are bent back to proper position and did not do any damage to any modules.

usually a fuse would blow first.

have you bent them back to as straight as possible? and seen if this fixed your issue?

Customer: replied 1 year ago.
no i have not bent them back.
Expert:  camerontech replied 1 year ago.

i would not not be too concerned about bending them back. I have done it myself a few times over the years by accident

. i would pull the airbag fuses first though, than get them back to original position as possible. plug it in and out a few times to make sure they are inserting correctly. than when you know they are fully inserted, reinistall the airbag fuses and clear the codes.

hopefully this has solved your original issue

Expert:  camerontech replied 1 year ago.

hi there

how did your repair go?

cam

Expert:  camerontech replied 1 year ago.

hi again,

please dont forget to rate me, as it is important for my page

thanks

cam