How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Auto Service Technician
Category: Chevy
Satisfied Customers: 27935
Experience:  14 years GM dealer Technician.
14928985
Type Your Chevy Question Here...
Pete is online now
A new question is answered every 9 seconds

1998 Chevy Venture 3.4 replaced ignition control module

Customer Question

Customer: 1998 Chevy Venture 3.4 replaced ignition control module crank sensor and still have no fire bought the van it ran great two days later I pulled into the gagrage and has no fire since thinking about cam sensor
JA: Thanks. Can you give me any more details about your issue?
Customer: i also checked to make sure the cam was broken
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $18) to post your type of question to Chevy Experts (you only pay if satisfied). There are a couple customers ahead of you. Are you willing to wait a bit?
Customer: yes
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Chevy
Expert:  Pete replied 1 year ago.

Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay.

The first thing to check here is to make sure all fuses are good in all fuse panels.If any ignition or any other fuses are found blown the affected fuses will need replaced to correct this fault here.If all fuses are found to be o.k. or were already checked follow the diagnostic procedure below and this will lead to the fault here.If you need more info from the chart let me know.

https://www.dropbox.com/s/6ya9a5taqxnvhip/d-01-04.gif?dl=0

https://www.dropbox.com/s/bhrh5y7k2vu1j6k/di-01-04.gif?dl=0

https://www.dropbox.com/s/2rmcan3r3haru65/dia-01-04.gif?dl=0

https://www.dropbox.com/s/5l1br4hhxxtuutp/diag-01-04.gif?dl=0

https://www.dropbox.com/s/j3ddfm50ww0y17p/diagr-01-04.gif?dl=0

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.

Thanks Pete