How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Auto Service Technician
Category: Chevy
Satisfied Customers: 28707
Experience:  14 years GM dealer Technician.
Type Your Chevy Question Here...
Pete is online now
A new question is answered every 9 seconds

2004 suburban z71 drivers door problems. Drivers mirror will

Customer Question

2004 suburban z71 drivers door problems. Drivers mirror will not work /pass will for controls. Drivers Door will not lock or unlock, all others will by control door light inop. heated seats inop, seat control works. control pannel will not light up. also seat control pannel will not light up.
Submitted: 1 year ago.
Category: Chevy
Customer: replied 1 year ago.
Key will lock and unlock the drivers door. All windows work correctly by control switch. All doors also work by control switch. windows, locks.
Expert:  Pete replied 1 year ago.

Hi my name is ***** ***** I will be happy to assist with this today.

From what you have described here this sounds like you may have broken or damaged wiring inside the drivers door itself or leading from the door to the body.I have seen wiring faults like this here before and had to repair or in some severe cases replace the wiring to correct this.I have also seen on some models door control module failure causing this.

I would check the wiring inside the door for any issues and if any issues are found the affected wiring needs repaired.If no wiring is found to be at fault this will need tested further to pinpoint and repair the cause here.

This will require a multi meter to test with and a scan tool that will plug into your vehicle that can communicate with all computers to see what codes are set.

Let me know if you need anything else here and feel free to rate my help.

Thanks Pete