Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP
Hello. Have you checked to see if you are getting power to the starter motor?
Ok. do you hear a click when you turn the key to the crank position?
You would have to remove the starter heat shield to test it for power.
There is actually a TSB for the body control module, let me review it..
Alright. The TSB pertains only to programming it. I don't believe that the BCM will cause a no crank condition, at least not in my experiences, but do you get a click when you turn the key or is it absolutely silent?
ok. After looking over the schematic very good for the BCM on your camaro, It's possible that it could have an effect on your starter. I am going to opt out so someone who has experienced this before can provide you with better assistance.
Hello my name is ***** ***** I can help.
What was done prior to the no start if anything?
Do you have remote start?
Can you post your VIN#
Please get back with me
Closed the question